Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke190 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100
The AirTAC SAIJ32X190-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel between 90 and 190 mm. Using the nominal 190 mm stroke, the external stopper can be dialed back by up to 100 mm, providing immense flexibility during machine commissioning or product changeovers without swapping the physical cylinder.
This variant uses a SUS304 stainless steel piston rod (option B) for superior corrosion resistance, paired with PT tapered port threads on its G1/8 supply ports. The extruded aluminum barrel includes sensor grooves on both sides for mounting standard switches. The rear adjuster acts purely as a mechanical stop to set the end position, working alongside the 27 mm variable air cushions at both ends to decelerate the load.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100 Is Used
Product Changeovers
Dial in the exact end-position from 90 to 190 mm on packaging lines when switching to a different product size, eliminating the need to physically swap cylinders or add external shims.
Variable End Stops
Provide an adjustable mechanical stop for light-duty testing rigs, allowing operators to quickly test multiple stroke lengths within the 100 mm adjustment window.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100 the Right Cylinder?
Choose this 32 mm bore model when your application requires a wide variable end-stop window within a compact ISO 15552 footprint. The SAIJ32X190-100 is selected specifically when you need to trim the stroke during commissioning rather than relying on a fixed-stroke SAI cylinder. To match this cylinder for an ISO 15552 replacement, verify the 32 mm bore, 190 mm stroke, 100 mm adjustment range, PT port thread, and the absence of a magnet (-S not specified). Because the stroke is under 300 mm, side-load concerns are minimal, but an external guide is still recommended for heavy lateral loads.
Remember that the rear adjuster is a travel stop, not a locking mechanism. It will not hold a load in place without live air pressure. If your application requires true fail-safe load holding, consider the SAIL air-released lock or BSAI clamp-lock cylinder series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100 FAQ
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the nominal 190 mm stroke by up to 100 mm, creating a usable travel window of 90 to 190 mm. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX190-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.