Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX210-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S
The AirTAC SAIJ32X210-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 210 mm travel back by up to 100 mm, creating a wide 110 to 210 mm usable window.
This model uses PT tapered port threads and relies on its built-in variable air cushions alongside the mechanical stopper to decelerate the load. The rear adjuster functions purely as a travel stop and does not lock the load without live air pressure, so a SAIL or BSAI variant is needed for true load-holding.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S Is Used
Product Changeover Stops
Dial in the exact end position from 110 to 210 mm when switching a packaging line to a different carton size without changing the cylinder.
Machine Setup Tuning
Fine-tune the retract end-stop during commissioning to perfect the pick-and-place depth before locking down the sequence.
Variable Test Travel
Iteratively shorten the stroke in a test fixture to find the optimal engagement distance for a new sensor or actuator prototype.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S the Right Cylinder?
Select this 32 mm bore cylinder when an application requires a 110 to 210 mm stroke range but you want to avoid bolting on external stops or swapping cylinders during product changeover. To match this ISO 15552 footprint, specify a 32 mm bore, 210 mm stroke, 100 mm adjustment, PT ports, and the -S magnet option.
Because the total travel reaches 210 mm, ensure adequate external guidance to prevent side-loading on the 12 mm rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S FAQ
The rear adjuster acts as a mechanical stop that lets you shorten the 210 mm nominal stroke by up to 100 mm, yielding a usable travel window of 110 to 210 mm. It only sets the end position and does not hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX210-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.