Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke220 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10
The AirTAC SAIJ32X220-10 is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 220 mm nominal stroke that can be fine-tuned down by up to 10 mm, giving you a precise 210-220 mm usable travel window during commissioning. Delivering 402 N of push force at 0.5 MPa, it handles light-duty positioning with ease.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads with a G1/8 connection. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE or DMSE switches later if positioning feedback becomes necessary.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10 Is Used
End-Stop Calibration
Dial in the exact 210-220 mm retract position during machine commissioning to perfect part seating without machining new hard stops.
Product Changeover
Quickly adjust the stroke by up to 10 mm on a packaging line when switching to a slightly different carton size, minimizing downtime.
Light-Duty Positioning
Utilize the 402 N push force to move small components into test fixtures, relying on the SUS304 rod for clean or mildly corrosive environments.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10 the Right Cylinder?
Choose this 32 mm bore when an application requires precise end-position tuning without the hassle of adding external stops or swapping cylinders during product changeovers. If your setup demands greater thrust, stepping up to the 40 mm bore increases push force to 628 N at 0.5 MPa. At 220 mm of total travel, the 12 mm rod diameter handles standard loads, but always verify guiding requirements to prevent excessive side-loading.
Because the rear adjuster acts strictly as a travel stop and the air cushions only manage deceleration, this cylinder cannot hold a load without live air pressure. For load-holding requirements without continuous air, consider an external pilot-operated check valve or explore the SAIL locking cylinder series. To match this ISO 15552 footprint exactly, specify the 32 mm bore, 220 mm stroke, 10 mm adjustment, PT port, and your desired mounting style from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10 FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 10 mm, creating a 210-220 mm travel window. It only sets the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX220-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.