Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX260-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100
The AirTAC SAIJ32X260-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 160-260 mm usable travel window, allowing you to dial back the nominal 260 mm stroke by up to 100 mm during commissioning.
This specific configuration incorporates a SUS304 stainless steel rod for superior corrosion resistance and ships without a magnet. The barrel is extruded aluminum with sensor grooves on both sides, and the standard PT tapered port threads match the G1/8 air supply interface. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without adding external stops.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100 Is Used
End-Position Tuning
Dial in the exact retract distance during machine commissioning without installing external physical stops.
Product Changeovers
Quickly adapt the travel window from 160 to 260 mm when running different sized components on the same line.
Light-Force Clamping
Apply up to 402 N of clamping force at 0.5 MPa, with the SUS304 rod resisting moisture in washdown areas.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100 the Right Cylinder?
An adjustable stroke is preferred over a fixed SAI cylinder when a machine requires frequent end-position tuning without swapping the hardware. Because the 260 mm stroke approaches the upper limits for this bore size, ensure external guides support the load to prevent excessive side-loading on the 12 mm rod.
For ISO 15552 replacement matching, verify the 32 mm bore, 260 mm stroke, 100 mm adjustment range, PT G1/8 port, and the absence of a magnet. Remember that the rear adjuster and air cushions only decelerate the load; they do not hold it without live air. For fail-safe load holding, consider an external pilot-operated check valve or the AirTAC SAIL lock cylinder series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100 FAQ
The rear adjuster acts as a mechanical stop that lets you shorten the 260 mm stroke down to 160 mm. It sets the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.