Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX260-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20
The AirTAC SAIJ32X260-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end-of-travel position without adding external stops. It provides a usable travel window of 240 to 260 mm, making it ideal for dialing in exact end positions during machine commissioning.
This model features a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads with a G1/8 connection. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. It operates at speeds between 30 and 800 mm/s and utilizes adjustable air cushions at both ends to decelerate the load smoothly.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20 Is Used
Machine Commissioning
Dial in the exact 240 to 260 mm end position during setup without swapping cylinders or adding external shims.
Product Changeover
Quickly adjust the retract stop by up to 20 mm to accommodate different part sizes on the same production line.
Light Assembly Push
Provides 402 N of smooth push force at 0.5 MPa for positioning light components with repeatable accuracy.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20 the Right Cylinder?
If your setup requires less force, stepping down is not an option in this size range, but stepping up to a 40 mm bore provides 628 N if your payload increases. The 20 mm adjustment range is perfect for product changeovers, whereas a fixed-stroke SAI cylinder would require physical shimming or replacement to alter the end stop.
Because this unit has a 260 mm stroke, ensure the load is guided externally to prevent excessive side loading on the SUS304 rod. Remember that the rear adjuster acts only as a travel stop, not a lock; the cylinder will not hold its position without live air. For load-holding requirements, consider an AirTAC SAIL or BSAI cylinder. This SKU is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20 FAQ
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 20 mm. This creates a usable travel window of 240 to 260 mm, which can be fine-tuned during commissioning.
At 0.7 MPa, the push force increases to 563 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.