Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX35-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke35 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30
The AirTAC SAIJ32X35-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position without adding external stops. With a nominal 35 mm stroke and a 30 mm adjustment range, it provides a usable travel window of 5 to 35 mm.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threading. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU is configured without a magnet for position sensing. The rear adjuster acts purely as a mechanical stop to dial in the retract position during commissioning.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30 Is Used
Machine Changeovers
Dial in the exact retract position within the 5-35 mm window during product size changes without swapping the physical cylinder.
End-Stop Calibration
Fine-tune the final resting position of small actuators in assembly fixtures where a fixed 35 mm stroke would be too rigid.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30 the Right Cylinder?
Choose this 32 mm bore unit when your application requires precise end-position tuning at setup or during product changeovers, avoiding the need to physically swap cylinders. Conversely, if you need a fixed, non-adjustable travel, the standard SAI series is a simpler alternative.
Because this is a double-acting cylinder, the rear adjuster only sets the travel end and does not hold the load without live air. For load-holding requirements without continuous pneumatic pressure, consider the SAIL (air-released lock) or BSAI (clamp-lock) series. This SAIJ model supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30 FAQ
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 30 mm. This creates a usable stroke window of 5 to 35 mm, allowing precise end-position tuning at commissioning without external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX35-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.