Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX400-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke400 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10
The AirTAC SAIJ32X400-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 390-400 mm usable travel window, allowing you to dial back the 400 mm nominal stroke by up to 10 mm during machine commissioning without adding external stops.
This variant incorporates a SUS304 stainless steel rod for superior corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, enabling direct mounting of CMSE reed or DMSE electronic solid-state switches if position feedback is later required. The integrated air cushions at both ends decelerate the piston to protect your tooling.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10 Is Used
End-Position Tuning
Dial in the exact 390-400 mm retract distance during machine setup to perfect product alignment without swapping hardware.
Product Changeover
Quickly adjust the stroke stop by up to 10 mm to accommodate varying package sizes on a single conveying line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10 the Right Cylinder?
Conversely, if the load is minimal, a smaller bore reduces air consumption. The adjustable rear stopper is ideal for fine-tuning the retract end-position on product changeovers, whereas a fixed-stroke SAI cylinder is preferred when the travel distance is permanently locked.
Because this cylinder lacks a magnet and uses a PT port thread, ensure your pneumatic fittings match. For a 400 mm stroke, the 12 mm rod diameter and M10x1.25 rod thread can handle moderate side loads, but an external guide rail is recommended to prevent rod binding over long unsupported travel. The rear adjuster acts strictly as a travel stop, not a load lock; if you need to hold a load vertically without live air pressure, specify an SAIL or BSAI series cylinder instead. This SAIJ model accepts a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10 FAQ
If higher pressure is used, the push force increases to 563 N at 0.7 MPa and 724 N at 0.9 MPa.
The rear adjuster screw lets you shorten the 400 mm nominal stroke by up to 10 mm, creating a 390-400 mm usable travel window. This stopper only sets the end position and deceleration; it does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.