Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX400-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke400 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75
The AirTAC SAIJ32X400-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 400 mm stroke that can be dialed back by up to 75 mm, creating a precise 325-400 mm usable travel window for on-the-fly end-position tuning.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and ships without a magnet. The rear adjuster acts purely as a mechanical stop to set the travel end, meaning it cannot hold a load without continuous live air pressure. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75 Is Used
Machine Changeover
Dial in the 325-400 mm travel window rapidly when switching product sizes on a packaging line, using the rear screw to set new end stops without changing hardware.
End-Position Tuning
Fine-tune the exact retracted position during commissioning to align delicate tooling, absorbing mechanical tolerance variations safely.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75 the Right Cylinder?
Choose this 32 mm bore when an application demands exact end-position tuning during commissioning or product changeovers, avoiding the need to swap cylinders or add external stops. Because this model features a 400 mm stroke, the 12 mm rod requires external guidance to prevent excessive side-loading and premature seal wear.
For a direct ISO 15552 replacement, match the 32 mm bore, 400 mm stroke, 75 mm adjustment range, PT tapered port thread, and the SUS304 (B) rod material. Note that because no magnet is specified, it will not trigger AirTAC CMSE or DMSE sensors. If true load-holding without air pressure is required, consider the SAIL or BSAI series instead of relying on the adjuster.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75 FAQ
At the maximum 1.0 MPa pressure, it achieves 82 kgf of push force.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 400 mm nominal stroke down to 325 mm. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX400-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.