Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX45-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke45 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S
The AirTAC SAIJ32X45-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 45 mm stroke that can be fine-tuned backward by up to 10 mm, creating a precise 35-45 mm usable travel window for exact end-positioning.
This variant features a SUS304 stainless steel rod for corrosion resistance and includes a piston magnet (-S) for position sensing. It supports AirTAC CMSE reed and DMSE electronic solid-state switches mounted in the dual-side sensor grooves of the extruded aluminum barrel. Fluid supply connects via PT G1/8 tapered ports.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S Is Used
End-Stop Calibration
Dial in the exact 35-45 mm retract position during machine setup without installing external physical stops on the fixture.
Product Changeover
Quickly adapt the cylinder's effective travel window on a packaging line when switching between slightly different material lengths.
Corrosive Positioning
Leverage the SUS304 stainless steel rod for precise component positioning in environments requiring higher corrosion resistance.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S the Right Cylinder?
The rear adjuster allows you to dial in the retract position during commissioning or product changeover without swapping cylinders or adding external stops. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
For ISO 15552 replacement matching, specify bore 32, stroke 45, adjustment 10, PT G1/8 ports, and the -S magnet. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for dead-stop holding, consider an external rod lock or the SAIL/BSAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S FAQ
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the nominal 45 mm stroke by up to 10 mm, providing a usable travel window of 35-45 mm. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.