Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX45-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke45 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S
The AirTAC SAIJ32X45-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 45 mm stroke that can be dialed back by up to 30 mm, yielding a highly versatile 15-45 mm usable travel window for exact end-position tuning.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for position sensing. It is designed to accept CMSE reed and DMSE electronic solid-state switches in its dual-side sensor grooves. The PT tapered port threads and integrated adjustable air cushions at both ends ensure secure, leak-free fittings and smooth end-of-stroke deceleration.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S Is Used
Machine Setup Calibration
Dial in the exact 15 to 45 mm retract position during initial commissioning without machining new hard stops.
Product Changeover
Quickly adjust the travel end-stop on a packaging line when switching between different product sizes.
Variable End-Stop Forming
Provide precise mechanical positioning for light-duty pressing or forming tasks that require adjustable depth.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S the Right Cylinder?
The rear stopper allows you to fine-tune the retract position during commissioning or product changeovers without swapping the cylinder or adding external stops.
Because the rear adjuster acts strictly as a travel stop and the cushions only manage deceleration, neither will hold a load without live air pressure. For load-holding requirements without continuous air, consider an external pilot-operated check valve or explore the SAIL or BSAI series. This SAIJ model is dimensionally interchangeable per ISO 15552 and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S FAQ
The rear adjusting screw acts as a mechanical stopper that shortens the effective stroke. For this model, the 45 mm nominal stroke can be trimmed back by up to 30 mm, giving an actual usable travel window of 15 to 45 mm.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX45-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.