Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX450-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke450 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S
The AirTAC SAIJ32X450-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 410-450 mm usable travel window, allowing you to dial back the 450 mm nominal stroke by up to 40 mm during machine commissioning.
This SKU uses a SUS304 stainless steel rod for corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel carries sensor grooves on both sides, and the PT tapered port threads match standard pneumatic fittings.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S Is Used
Product Changeover
Quickly reposition the retract stop by up to 40 mm when switching between product sizes on a packaging line, avoiding cylinder swaps.
End-Position Tuning
Fine-tune the final end-of-stroke position during machine setup to perfect a delicate pressing operation without external stops.
Variable Diverter Stroke
Adjust the actuation distance of a conveyor routing gate on the fly to accommodate different package widths.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S the Right Cylinder?
If your process needs more power, stepping up to the 40 mm bore yields 628 N. The rear adjuster screw acts solely as a travel stop to fine-tune the 410-450 mm window; it does not hold the load without live air. For true load-holding without pressure, select an SAIL or BSAI cylinder.
Because the 450 mm stroke is relatively long for a 32 mm bore, the M10x1.25 rod is susceptible to side-loading. Always guide the load externally to prevent rod binding. This unit is dimensionally interchangeable per ISO 15552 and uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S FAQ
The rear adjuster screw lets you shorten the effective travel from the 450 mm nominal stroke down to 410 mm. It functions purely as a mechanical stop to set the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX450-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.