Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX60-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S
The AirTAC SAIJ32X60-50-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 10 to 60 mm, allowing you to dial back the nominal 60 mm stroke by up to 50 mm during machine commissioning.
This variant incorporates a SUS304 stainless steel rod for superior corrosion resistance and includes a piston magnet for electronic DMSE or reed CMSE sensors. The extruded aluminum barrel integrates sensor grooves on three sides, and the PT tapered port threads ensure a tight, reliable seal.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S Is Used
Variable End-Stop Positioning
Dial in the exact retraction point between 10 and 60 mm during machine commissioning to accommodate varying product sizes without adding external mechanical stops.
Corrosive Environment Actuation
Leverage the SUS304 stainless steel rod for light-duty clamping or pushing tasks in washdown or chemical-exposure areas where carbon steel rods would fail.
Sensor-Ready Changeover
Utilize the integrated magnet for DMSE solid-state or CMSE reed switches to confirm end-of-travel positions across different adjusted stroke lengths.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S the Right Cylinder?
Select this 32 mm bore model when your application requires a compact footprint but still needs on-the-fly end-stop tuning without swapping cylinders. Choose the SAIJ adjustable series over a fixed-stroke SAI when accommodating product size changeovers or fine-tuning a gripper's approach distance.
Remember that the rear adjuster acts strictly as a mechanical stop and does not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL pneumatic lock series or an external pilot-operated check valve. This SAIJ32X60-50-S model uses a PT G1/8 port, offers a 30-800 mm/s speed range, and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 ISO 15552 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S FAQ
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw lets you mechanically shorten the stroke by up to 50 mm, creating a usable travel window of 10 to 60 mm. It acts only as a travel stop and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.