Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100
The AirTAC SAIJ32X600-100 is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32mm bore and a 600mm nominal stroke, yielding a usable travel window of 500 to 600mm. This built-in adjustment range allows you to dial in the exact retract position at commissioning without swapping hardware. At 0.5 MPa, it delivers 402N of push force and 345N of pull force.
This unit is configured with a SUS304 stainless steel rod (code B) for superior corrosion resistance and uses PT tapered port threads with a G1/8 connection. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU is specified without a magnet. The rear stopper screw sets the travel end, but remember it acts only as a physical stop, not a load-holding lock.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100 Is Used
Product Size Changeovers
Quickly reconfigure the retract distance by up to 100mm when running different product lengths on the same production line, avoiding mechanical rebuilds.
Commissioning Fine-Tuning
Dial in the exact end-of-stroke position during machine setup to perfectly align tooling without adding external stopper blocks.
Variable End-Stop Positioning
Adjust the physical retract limit on a 600mm stroke to accommodate varying conveyor widths or diverter arm requirements on the fly.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100 the Right Cylinder?
Choose this 32mm bore when you need precise end-position tuning on a long-stroke application, stepping up to a 40mm bore would increase push force to 628N at 0.5 MPa if higher thrust is required. The 100mm adjustment window is ideal for product-size changeovers on a line, providing flexibility that a fixed-stroke SAI cylinder cannot match. Because the nominal stroke is 600mm, an external guide is strongly recommended to prevent excessive side-loading on the piston rod.
To match this configuration for an ISO 15552 replacement, specify the 32mm bore, 600mm stroke, PT port threads, SUS304 (B) rod material, and the 100mm adjustment code. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories. For applications requiring the load to be held without live air pressure, select a SAIL locking cylinder or an external rod lock, as the SAIJ adjuster and air cushions cannot hold a load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100 FAQ
Operating at 0.5 MPa, this 32mm bore cylinder provides 402N of push force and 345N of pull force. If higher pressures are used, the push force increases to 563N at 0.7 MPa and 724N at 0.9 MPa.
The rear adjuster screw allows you to mechanically shorten the effective stroke by up to 100mm, providing a usable travel window between 500mm and 600mm. This stopper sets the travel end but does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.