Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75
The AirTAC SAIJ32X600-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits an effective travel window of 525 to 600 mm. Delivering 402 N of push force at 0.5 MPa, it integrates a durable SUS304 stainless steel rod and PT tapered port threads. The extruded aluminum barrel includes dual-side sensor grooves, though position detection requires adding a magnet.
This adjustable-stroke configuration allows you to fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop to set the end-of-stroke deceleration alongside the standard air cushions; it is not a lock and cannot hold a load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75 Is Used
Machine Changeover
Dial in the 525-600 mm travel window during product size transitions without physically replacing the cylinder or repositioning hard stops.
Variable End-Stop Routing
Adjust the retract position on the fly to alter where parts are halted or diverted on a long transfer line.
Commissioning Calibration
Fine-tune the final end-position during setup to compensate for mechanical tolerance stack-up across a 600 mm stroke.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75 the Right Cylinder?
Select this 32 mm bore when an application requires a 525-600 mm travel window and up to 402 N of push force at 0.5 MPa. If your process demands higher thrust, stepping up to the 40 mm bore yields 628 N. The 75 mm adjustment range is ideal for product changeovers on a line, providing a variable end-stop that a fixed-stroke SAI cylinder cannot offer. For load-holding without continuous air pressure, utilize an external rod lock or pilot-operated check valve, or select an SAIL or BSAI cylinder.
To match this ISO 15552 interchangeable cylinder, specify a 32 mm bore, 600 mm nominal stroke, 75 mm adjustment, PT ports, and the SUS304 (B) rod material. Because the 600 mm stroke is long, the 12 mm rod diameter and M10x1.25 rod thread will not prevent rod sag; an external guide is required to manage side loads and maintain alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75 FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw allows you to trim the effective stroke back by up to 75 mm, creating a usable travel window of 525 to 600 mm. The adjuster functions as a mechanical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.