Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX650-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke650 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50
The AirTAC SAIJ32X650-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 600-650mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides.
This adjustable-stroke design allows you to fine-tune the retract end position during commissioning without swapping the cylinder or adding external stops. The 50mm adjustment screw acts purely as a mechanical travel stop to set deceleration, not as a lock to hold the load without live air. For position holding, an external rod lock or SAIL cylinder is required.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50 Is Used
Machine Setup and Changeover
Dial in the exact retract distance between product runs by adjusting the rear stopper up to 50mm, avoiding the need to physically swap cylinders when tolerances shift.
Variable End-Stop Positioning
Provides a 600-650mm travel window on a long-stroke conveyor sorting arm, allowing operators to fine-tune the retracted resting position during initial commissioning.
Corrosive Environment Testing
The SUS304 stainless steel rod withstands moisture and mild chemicals in environmental test chambers while maintaining ISO 15552 mounting interchangeability.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50 the Right Cylinder?
Choose this 32mm bore when you need precise end-position tuning for a 650mm stroke application. The SAIJ32X650-50 configuration includes a PT port thread, SUS304 (code B) rod material, and no magnet, meaning it is not compatible with CMSE or DMSE sensors without modification. Mounting options are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Because the 650mm stroke is long relative to the 12mm rod diameter, an external guide is strongly recommended to prevent excessive side-load damage. The rear adjuster is a stop, not a brake; if the machine loses air pressure, this cylinder will not hold its load. Use a pilot-operated check valve or a BSAI clamp-lock cylinder for fail-safe load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50 FAQ
At the maximum 1.0MPa pressure, it delivers up to 82kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 50mm, creating a usable travel window of 600-650mm. This stopper sets the end position but does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX650-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.