Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S
The AirTAC SAIJ32X700-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 402 N of push force at 0.5 MPa and features a 690-700 mm usable travel window, letting you dial in the exact retract position without external stops. The integrated magnet (-S) supports position sensing, while the SUS304 stainless steel rod provides excellent corrosion resistance.
This 32 mm bore model uses a G1/8 port and includes adjustable air cushions at both ends to manage kinetic energy. The rear adjuster functions purely as a travel stop for end-position tuning, not as a lock, so live air is required to maintain the load. For position holding without pressure, consider an external rod lock or the SAIL series.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S Is Used
Machine Changeover
Fine-tune the 690-700 mm retract position during product size changes without swapping cylinders or adding mechanical shims.
Divertor Adjustment
Dial in the exact end-stop for a pneumatic diverter arm, accommodating minor variations in package dimensions on the fly.
End-Stop Calibration
Achieve precise end-position calibration at machine commissioning by trimming up to 10 mm off the nominal stroke via the rear screw.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S the Right Cylinder?
Choose this 32 mm bore when your application requires precise end-position tuning over a long 700 mm travel. If you need higher thrust, stepping up to the 40 mm bore increases push force to 628 N at 0.5 MPa. The adjustable-stroke design is ideal for machine setups requiring frequent changeovers, whereas a fixed SAI cylinder is better for set-and-forget operations.
Because this is a 700 mm stroke, the 12 mm rod requires external guidance to prevent excessive side-loading and binding. This SKU is dimensionally interchangeable per ISO 15552 and includes a PT tapered port, a SUS304 rod, and a magnet for CMSE or DMSE sensors. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a stopper, allowing you to shorten the effective stroke by up to 10 mm, creating a 690-700 mm travel window. It only sets the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX700-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.