Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX85-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke85 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10
The AirTAC SAIJ32X85-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 75-85 mm window. This 32 mm bore actuator operates at speeds between 30-800 mm/s.
The rear adjuster acts purely as a mechanical stop for end-position tuning during commissioning; it is not a lock, so the cylinder will not hold a load without live air pressure. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10 Is Used
Machine Setup Tuning
Dial in the exact 75-85 mm end position during initial commissioning without adding external physical stops to your fixture.
Product Changeover
Quickly adapt the stroke end-point on a packaging line when switching between slightly different product sizes or thicknesses.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10 the Right Cylinder?
The 10 mm adjustment range is ideal for machine setups requiring variable end-stops or product changeovers, avoiding the need to swap out a fixed-stroke SAI cylinder. For position holding without live air, consider the SAIL or BSAI series instead. To match this ISO 15552 interchangeable cylinder, specify: 32 mm bore, 85 mm stroke, 10 mm adjustment, PT G1/8 port, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10 FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you shorten the nominal 85 mm stroke by up to 10 mm, creating a 75-85 mm usable travel window. It functions as a mechanical stop for fine-tuning, not as a lock, so it cannot hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX85-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.