Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX90-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke90 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75
The AirTAC SAIJ32X90-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 15-90 mm usable travel window from its 90 mm nominal stroke. This bore size operates at speeds from 30-800 mm/s and includes variable air cushions at both ends.
The integrated rear stopper screw allows precise end-position tuning during commissioning without adding external stops. Remember that this adjuster acts only as a travel stop and does not hold the load without live air pressure. For load-holding requirements, consider an external pilot-operated check valve or the SAIL lock series.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75 Is Used
Product Changeovers
Dial in the 15-90 mm travel window on the fly to accommodate different package sizes on a packaging line without changing the cylinder.
Machine Setup
Fine-tune the retract end-position during commissioning to achieve exact sensor alignment and mechanical synchronization.
Variable End Stops
Use the rear stopper to test multiple extend lengths during prototyping before locking in a final mechanical position.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75 the Right Cylinder?
The massive 75 mm adjustment range on a 90 mm stroke is ideal for machines processing multiple product sizes on a single line, replacing the need to swap fixed-stroke SAI cylinders. This model uses a SUS304 rod and PT ports, making it dimensionally interchangeable per ISO 15552.
Because the nominal stroke is under 300 mm, side-load stress is manageable, but always ensure the load is guided to prevent binding. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Note that without a magnet, this base unit cannot host CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75 FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to trim the effective stroke back by up to 75 mm, creating a 15-90 mm usable travel window. It acts as a mechanical stop and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX90-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.