Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke95 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30
The AirTAC SAIJ32X95-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 65-95mm usable travel window. Delivering 402N of push force at 0.5 MPa, it uses a PT G1/8 port and a 12mm SUS304 stainless steel rod for corrosion resistance.
The integrated rear stopper screw lets you fine-tune the retract end-position during commissioning without adding external stops. This cylinder supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30 Is Used
Machine Setup Tuning
Dial in the exact 65-95mm retract position during initial commissioning to perfect a pressing or feeding operation without machining external spacers.
Product Changeover
Quickly adapt the end-stop for a new product length on a packaging line by turning the rear adjuster screw to shift the travel window.
Variable End-Stop Positioning
Achieve precise end-of-stroke positioning for light-duty assembly tasks where a 402N thrust is sufficient to complete the work.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30 the Right Cylinder?
Choose this 32mm bore when a 402N output at 0.5 MPa is sufficient, or step up to the 40mm bore for 628N if your payload demands more force. The adjustable 65-95mm travel window is ideal for machine setups requiring variable end-stops rather than a fixed SAI stroke.
The rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series. This SKU uses a PT tapered port thread and lacks a magnet, so it does not support CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30 FAQ
It has a 95mm nominal stroke with a 30mm adjustment range, allowing you to set the effective travel anywhere between 65mm and 95mm using the rear stopper.
At a 0.5 MPa operating pressure, it provides 402N of push force and 345N of pull force, with a maximum thrust of 724N at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX95-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.