Airtac BSE Clamp Standard Cylinder BSE63X700S
The AirTAC Airtac BSE Clamp Standard Cylinder BSE63X700S is a genuine double-acting ISO 15552 cylinder with an integrated spring-applied, air-released ROD LOCK. If air is cut or an E-stop is hit, the collet clamps the Ø20mm rod and holds up to 2200 N in either direction — no drift. Ø63mm bore, 700mm stroke, PT3/8 cylinder ports, G1/8 lock-release port.
- BoreØ63 mm
- Stroke700 mm
- Static holding force2200 N
- Lock typeSpring-lock / air-release
- Cylinder portPT3/8
- Lock-release portG1/8
About the Airtac BSE Clamp Standard Cylinder BSE63X700S
The AirTAC BSE63X700S is a double-acting, single-rod ISO 15552 profile cylinder with an integrated spring-applied, air-released rod lock. A collet clamps the Ø20 mm piston rod automatically, delivering a 2200 N bidirectional static holding force with zero live air. Operating pressure is capped at 0.7 MPa, and a separate G1/8 release port unlocks the mechanism.
This 700 mm stroke unit includes a magnetic piston for position sensing and adjustable air cushions at both ends. The lock is a fail-safe holding device, not a dynamic brake. You must engage it only after the rod stops, release it only when piston pressures are balanced, and allow at least 0.5 s before moving.
Rod Lock — 2200 N Static Holding (Ø63mm)
A spring clamps the collet onto the rod, so the Airtac BSE Clamp Standard Cylinder BSE63X700S holds its position in both directions when air is lost, exhausted or an E-stop trips. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage the lock only after the rod has stopped (it is not a dynamic brake), and release only when the pressures on both sides of the piston are balanced. Allow at least 0.5 s for full release before moving.
Airtac BSE Clamp Standard Cylinder BSE63X700S Technical Specifications
| Model | Airtac BSE Clamp Standard Cylinder BSE63X700S |
|---|---|
| Series | BSE ISO 15552 rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSE datasheet. The lock uses the SE standard body; SE mounting accessories fit BSE except FTC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa (max) | 2182 N | — |
| Max drive (@0.7 MPa) | 223 kgf | |
Drive force is separate from the 2200 N static holding force of the lock. BSE operates up to 0.7 MPa. Size with a safety margin.
Model Code: Airtac BSE Clamp Standard Cylinder BSE63X700S
| B | Rod-lock cylinder prefix. |
|---|---|
| SE | ISO 15552 standard double-acting body. |
| 63 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSE): Basic, LB, FA, FB, CA, CB, CR, TC (FTC is not available on BSE). Related: SE (no lock), BSED (double-rod rod lock). Sensors CMSE/DMSE fit magnetic BSE.
Where the Airtac BSE Clamp Standard Cylinder BSE63X700S Is Used
Vertical Pallet Lift
Holds a raised pallet station mid-stroke. The 2200 N fail-safe collet grip prevents a sudden drop if the air supply drops, while the 2182 N drive handles the lift.
Injection Mold Tool Clamp
Secures a heavy mold tooling plate in position. The spring-applied lock maintains the clamp during an E-stop or air exhaustion, independent of the 1559 N pull force.
Pallet Stop Gate
Acts as a static stop gate on an assembly line. The lock keeps the 700 mm stroke rod firmly extended at 2200 N holding force without consuming continuous air.
Is the Airtac BSE Clamp Standard Cylinder BSE63X700S the Right Cylinder?
Verify your suspended load requires a hold under 2200 N and a drive force under 2182 N. If you need less push, the 50 mm bore offers 982 N push at 0.5 MPa and 1400 N holding force. For heavier suspension, step up to the 80 mm bore, which provides 2513 N push at 0.5 MPa and 3600 N holding force.
At 700 mm, the rod is highly susceptible to bending under side loads; guide the load externally to prevent seal damage. The -S magnet supports CMSE reed and DMSE electronic sensors. SE mounting accessories fit this body except FTC. The cylinder port is PT3/8, while the lock-release port is G1/8.
Quick checklist
- ✓ Load to hold ≤ 2200 N?
- ✓ Fail-safe hold on air loss / E-stop needed
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not as a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Add safety-rated controls for man-rated / overhead loads.
- check Use SE mounting accessories (FTC excepted).
Airtac BSE Clamp Standard Cylinder BSE63X700S FAQ
The drive force is 1559 N push and 1402 N pull at 0.5 MPa, or 2182 N push at 0.7 MPa (max 222 kgf). The separate spring-applied rod lock provides a 2200 N static holding force with no live air.
Balance the air pressure on both sides of the piston first. Supply 0.15-0.7 MPa to the G1/8 release port to disengage the collet, and wait at least 0.5 s before commanding movement. Never engage the lock while the rod is moving.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSE Cylinders
Request a Quote for Airtac BSE Clamp Standard Cylinder BSE63X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.