Airtac SAI32 Standard Cylinder SAI32AX100S
The AirTAC SAI32 Standard Cylinder SAI32AX100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX100S
The AirTAC SAI32X100-S is a double-acting ISO 15552 profile cylinder offering 402N of push force at 0.5 MPa and a 100mm stroke. Its extruded aluminum barrel design omits tie rods, providing a clean exterior that drops directly into standard ISO 15552 mounting interfaces.
This specific configuration includes a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance over standard carbon steel. The -S suffix indicates an embedded magnet, allowing seamless integration with CMSE or DMSE reed sensors in the dual side grooves.
Airtac SAI32 Standard Cylinder SAI32AX100S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX100S Is Used
Small Part Ejection
Uses the 402N push force at 0.5 MPa to eject small molded parts from a fixture.
Package Diverting
Actuates a lightweight diverter arm on a packaging line with a 100mm stroke.
Clamp Actuation
Provides repeatable clamping pressure for light woodworking or assembly jigs.
Is the Airtac SAI32 Standard Cylinder SAI32AX100S the Right Cylinder?
If an application requires less force, stepping down is not an option below 32mm in this series, but moving up to a 40mm bore increases the 0.5 MPa push force to 628N. The PT tapered port threads provide a reliable, leak-free pneumatic connection.
Because the 100mm stroke is relatively short, rod-bearing bending is minimal. However, if the machinery loses air pressure, this standard cylinder cannot hold a load in place; consider the SAIL variant with an air-released lock for suspended or gravity-loaded applications.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX100S FAQ
The SAI32X100-S generates 402N of push force at 0.5 MPa and 563N at 0.7 MPa.
Yes, the -S suffix indicates a magnet is included, allowing you to mount CMSE or DMSE sensors directly into the barrel grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.