Airtac SAI32 Standard Cylinder SAI32AX280
The AirTAC SAI32 Standard Cylinder SAI32AX280 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke280 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX280
The AirTAC SAI32X280 is a double-acting ISO 15552 profile cylinder engineered to deliver 402 N of push force at 0.5 MPa, scaling to 563 N at 0.7 MPa. Its 280 mm stroke provides the extended travel needed for automated sorting and light assembly tasks. As a genuine AirTAC component, it ensures reliable pneumatic performance.
This specific configuration utilizes a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. It features PT tapered port threads and lacks a standard magnet, meaning position sensing via CMSE or DMSE switches requires a custom -S suffix modification.
Airtac SAI32 Standard Cylinder SAI32AX280 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX280 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX280
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX280 Is Used
Package Sorting Diverter
Pushes lightweight cardboard cartons on a 280 mm stroke across a conveyor belt without bending the rod.
Component Ejection
Ejects machined plastic parts from a fixture using 563 N of force at 0.7 MPa operating pressure.
Pallet Stopper Gate
Acts as a pneumatic stop gate for low-profile pallets, relying on PT threaded ports for secure fittings.
Is the Airtac SAI32 Standard Cylinder SAI32AX280 the Right Cylinder?
Select this 32 mm bore model when an application demands moderate force over a 280 mm distance, but does not require electronic position feedback. If your mechanism needs less reach, stepping down to a shorter stroke reduces rod mass and bearing wear. For higher force requirements at the same travel, consider moving up to the 40 mm bore, which provides 628 N at 0.5 MPa.
Because the 280 mm stroke creates an extended unsupported rod length, it is susceptible to bending under side loads. Implement external guide rails or use a guided cylinder to prevent rod-bearing damage. Furthermore, standard air cushions only decelerate the piston at end-of-stroke and do not act as a brake; if the air supply drops, the load will drift, requiring an external check valve for safety. This unit is dimensionally interchangeable per ISO 15552, accepting standard LB foot mounts and FA flanges.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX280 FAQ
The SAI32X280 generates a push force of 402 N at 0.5 MPa and 563 N at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
Yes, the SAI32X280 is dimensionally interchangeable per ISO 15552 mounting dimensions, allowing it to serve as a direct replacement for other standard profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX280
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.