Airtac SAI32 Standard Cylinder SAI32AX475
The AirTAC SAI32 Standard Cylinder SAI32AX475 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke475 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX475
The AirTAC SAI32X475 is a double-acting ISO 15552 profile cylinder engineered for precise linear motion across a 475 mm stroke. It generates 563 N of push force at 0.7 MPa, making it suitable for light-load positioning tasks. The extruded aluminum barrel omits tie rods to provide a clean, standardized mounting interface that drops directly into ISO 15552 machinery footprints.
This specific configuration features a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. It utilizes PT tapered port threads, and because it lacks a built-in magnet, it relies on external limit switches or mechanical stops for position detection rather than barrel-mounted sensors.
Airtac SAI32 Standard Cylinder SAI32AX475 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX475 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX475
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX475 Is Used
Package Diverting
Pushes lightweight cardboard cartons across a 475 mm transfer zone with 402 N of force at 0.5 MPa.
Component Sorting
Actuates a sorting gate for small plastic parts where a compact 32 mm bore footprint is required.
Tray Indexing
Advances empty packaging trays along a guided track using the full 475 mm stroke length.
Is the Airtac SAI32 Standard Cylinder SAI32AX475 the Right Cylinder?
Selecting this 32 mm bore over smaller options provides a noticeable force upgrade, while stepping up to a 40 mm bore would yield 879 N at 0.7 MPa for heavier payloads. Because this model features a 475 mm stroke, the extended rod is susceptible to bending under side loads; utilizing an external guide rail or a dedicated guided cylinder is strongly recommended to prevent premature rod-bearing wear.
As a standard double-acting actuator, this cylinder will drift if air pressure is lost or exhausted, meaning it cannot hold a vertical load safely without external mechanical locks. For direct compatibility, ensure your setup matches the 32 mm bore, 475 mm stroke, PT G1/8 port, and desired mounting accessories like LB foot or FA flange brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX475 FAQ
At an operating pressure of 0.7 MPa, this 32 mm bore cylinder provides a push force of 563 N. If you need higher force, stepping up to a 40 mm bore yields 879 N.
Yes, the SAI32X475 is dimensionally interchangeable per ISO 15552. It can serve as a direct replacement for other standard profile cylinders with matching 32 mm bore and 475 mm stroke dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX475
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.