Airtac SAI32 Standard Cylinder SAI32AX600
The AirTAC SAI32 Standard Cylinder SAI32AX600 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX600
The AirTAC SAI32X600 is a double-acting ISO 15552 profile cylinder engineered for long-reach linear motion. It generates 563 N of push force at 0.7 MPa and is built with a durable extruded aluminum barrel without tie-rods. This specific configuration uses a SUS420J2 stainless steel piston rod (material code A) and PT tapered port threads.
Because the 600 mm stroke exceeds the standard 500 mm limit for this 32 mm bore, it is manufactured as a non-standard, made-to-order unit. The extruded profile includes sensor grooves on both sides, allowing for direct mounting of CMSE or DMSE switches if a magnet is specified in future revisions.
Airtac SAI32 Standard Cylinder SAI32AX600 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX600 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX600
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX600 Is Used
Long-Reach Diverting
Pushes lightweight packages across a wide conveyor belt section over a 600 mm span where standard strokes fall short.
Vertical Material Elevation
Lifts small totes or bins between elevated machinery levels, utilizing the 402 N push force available at 0.5 MPa.
Remote Tool Positioning
Actuates an end-effector safely away from the primary work zone, requiring external linear guides to maintain tool alignment.
Is the Airtac SAI32 Standard Cylinder SAI32AX600 the Right Cylinder?
Selecting this 600 mm stroke model requires careful attention to mechanical guidance. At this extended length, the piston rod is highly susceptible to bending under side loads. You should use an external guide rail or a dedicated guided cylinder to prevent rod-bearing damage and premature wear.
If your application requires less reach, stepping down to a standard 500 mm stroke avoids the made-to-order lead time. If you need to hold a load mid-stroke during a pressure loss or valve centering, note that the standard adjustable air cushions only decelerate the piston at end-strokes. For true locking, specify the SAIL variant or use an external pilot-operated check valve. This unit is dimensionally interchangeable per ISO 15552, accepting standard LB foot or FA flange mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX600 FAQ
At 0.7 MPa operating pressure, this 32 mm bore cylinder provides a push force of 563 N and a pull force of 345 N. The maximum theoretical force at 1.0 MPa is 82 kgf.
Yes, the SAI32X600 is a true ISO 15552 profile cylinder, making its mounting interface and dimensions interchangeable with other standard ISO 15552 cylinders. It uses PT tapered ports and standard mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.