Airtac SAI32 Standard Cylinder SAI32AX700
The AirTAC SAI32 Standard Cylinder SAI32AX700 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX700
The AirTAC SAI32X700 is a double-acting ISO 15552 profile cylinder engineered for long-trroke actuation. Delivering a push force of 563 N at 0.7 MPa, this 32 mm bore unit is built to handle extended 700 mm movements with reliable pneumatic power.
This model features a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. It uses PT tapered port threading and lacks a standard magnet, meaning position sensing via CMSE or DMSE switches is not supported without modification.
Airtac SAI32 Standard Cylinder SAI32AX700 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX700 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX700
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX700 Is Used
Long-Stroke Transfer
Pushes products or pallets down a 700 mm production line where compact 32 mm bore sizing is preferred over bulky actuators.
Bin Push-Off
Actuates a sliding gate or pusher plate to divert small components into sorting bins at 402 N push force at 0.5 MPa.
Light Clamping
Extends across a wide fixture gap to hold lightweight workpieces in place during secondary machining operations.
Is the Airtac SAI32 Standard Cylinder SAI32AX700 the Right Cylinder?
A 700 mm stroke on a 32 mm bore creates a long, unsupported rod highly susceptible to bending under side loads. To prevent premature seal wear and rod bearing failure, implement an external guide rail or switch to a guided cylinder design for this length. If your application requires more thrust, stepping up to the 40 mm bore yields 879 N at 0.7 MPa.
As an ISO 15552 standard cylinder, this model serves as a direct dimensional replacement for other profile cylinders matching the 32 mm bore, 700 mm stroke, PT G1/8 port, and standard mounting accessory dimensions. Note that the standard SAI does not hold position when air pressure is removed; use the SAIL locking variant if fail-safe load holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX700 FAQ
The SAI32X700 generates a push force of 402 N at 0.5 MPa, 563 N at 0.7 MPa, and 724 N at 0.9 MPa. The pull force at 0.5 MPa is 345 N.
Yes, the SAI32X700 is dimensionally interchangeable with other ISO 15552 profile cylinders matching the 32 mm bore and 700 mm stroke specifications, utilizing a G1/8 port and standard mounting interfaces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.