Airtac SAI32 Standard Cylinder SAI32AX700S
The AirTAC SAI32 Standard Cylinder SAI32AX700S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX700S
The AirTAC SAI32X700-S is a double-acting ISO 15552 profile cylinder engineered for long-trroke automation. Delivering a push force of 563 N at 0.7 MPa, this 32 mm bore unit is built to handle extended 700 mm movements with reliable pneumatic power.
This specific configuration includes a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance. The integrated magnet (-S) enables seamless position detection using CMSE or DMSE switches mounted directly into the dual sensor grooves on the extruded aluminum barrel. It features PT tapered port threads.
Airtac SAI32 Standard Cylinder SAI32AX700S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX700S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX700S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX700S Is Used
Long-Reach Diversion
Pushes products across wide conveyor belts over a 700 mm span, utilizing the integrated magnet for precise end-position confirmation.
High-Bay Extraction
Extracts totes from deep shelving racks where extended reach is required, relying on the SUS420J2 rod to resist environmental moisture.
Film Web Handling
Actuates tensioning arms over large web processing machinery, benefiting from the adjustable air cushions to prevent end-cap slamming.
Is the Airtac SAI32 Standard Cylinder SAI32AX700S the Right Cylinder?
A 700 mm stroke on a 32 mm bore generates significant leverage, making the rod bearing highly susceptible to bending under side loads. For this length, always specify external linear guides or a guided cylinder carriage to prevent premature seal wear and rod distortion.
If your application requires less reach, stepping down to a SAI32X500 keeps the same 402 N push force at 0.5 MPa within a shorter footprint. This cylinder is dimensionally interchangeable per ISO 15552, accepting standard FA flange or LB foot mounts. Note that standard air cushions only decelerate the piston at end-of-stroke; they do not hold a load. If pressure drops, use a SAIL lock variant or external pilot check valve to prevent drifting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX700S FAQ
At 0.7 MPa operating pressure, this 32 mm bore cylinder provides a push force of 563 N and a pull force of 345 N at 0.5 MPa.
Yes. The SAI32X700-S is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders of the same bore and stroke. You can reuse existing mounting hardware like TC trunnions or CA clevis.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.