Airtac SC32 Standard Cylinder SC32X95S
The AirTAC Airtac SC32 Standard Cylinder SC32X95S is a genuine double-acting standard air cylinder with a Ø32mm bore and 95mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke95 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X95S
The SC32X95S is a compact double-acting tie-rod cylinder with a 32 mm bore and 95 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration in a space-saving body length of just 140 mm.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the barrel for non-contact position sensing. It operates on filtered air at 0.15–1.0 MPa across a temperature range of -20 to +70 °C with standard TPU seals.
Airtac SC32 Standard Cylinder SC32X95S Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X95S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X95S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X95S Is Used
Small Part Ejection
The 95 mm stroke and sensor-ready magnet make this cylinder ideal for ejecting small plastic or metal components from injection molds or pick-and-place nests, confirming full extension with a CMSG sensor.
Lightweight Diverter Gates
Use the SC32X95S to actuate small diverter flaps on conveyor lines. The adjustable cushion softens the end-of-stroke impact, reducing noise and wear in high-cycle sorting operations.
Lab Automation Actuation
In benchtop diagnostic or packaging machinery, this cylinder provides clean, oil-free actuation. The built-in magnet enables precise position feedback for liquid dispensing or vial capping sequences.
Is the Airtac SC32 Standard Cylinder SC32X95S the Right Cylinder?
Choose the SC32 bore for light pneumatic tasks needing up to 402 N at 0.5 MPa. If your application requires more force, step up to the SC40 bore which provides 628 N at the same pressure. For strokes of 300 mm or more, even on a 32 mm bore, consider an external guide or a guided cylinder to protect the 12 mm rod from bending under side loads.
To ensure a correct replacement, match five points: bore (32 mm), stroke (95 mm), port thread (PT1/8), mounting accessory (basic, no bracket), and the built-in magnet (-S) for sensor compatibility. This SC cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with those designs.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X95S FAQ
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
Yes. The -S suffix in SC32X95S designates a built-in magnet on the piston. This allows you to clamp AirTAC CMSG, DMSG, or EMSG sensors directly onto the barrel's tie-rod slots to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.