The AirTAC AirTAC SE100X350 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 350mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X350 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 3927 N of push force and 3681 N of pull force at 0.5 MPa. With a 100 mm bore and 350 mm stroke, it operates at speeds between 30-800 mm/s using a PT1/2 port. Its extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while simplifying sensor placement along three integrated grooves.
This actuator features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a screw to prevent hard mechanical impacts during high-speed operations. Because this specific SKU lacks the -S magnet option, it does not support direct CMSE or DMSE position sensing without modification. The robust Ø25 mm rod with an M20x1.5 thread provides excellent structural rigidity, and the standardized ISO 15552 mounting interface ensures true dimensional interchangeability with comparable profile cylinders.
| Model | AirTAC SE100X350 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 3927 N of push force at 0.5 MPa to secure heavy injection molding tools during part ejection cycles.
Drives a 350 mm stroke to position upper press brake tooling, utilizing adjustable cushioning to soften hard end stops.
Shifts heavy palletized loads on conveyor lines, using the 100 mm bore's 801 kgf maximum capacity to overcome friction.
When sizing this actuator, consider stepping down to the 80 mm bore if your application only requires 2513 N of push force at 0.5 MPa, or stepping up to the 125 mm bore for 6136 N of push force to handle heavier loads. Keep in mind that a standard SE cylinder cannot hold a load or maintain its position if air pressure is lost or the valve is centered; the piston will drift. For applications requiring secure load holding without live pressure, explore the BSE rod lock variant or an external pilot-operated check valve. Additionally, at 350 mm of stroke, the unsupported rod length increases bending moments on the front bearing under side loads; always incorporate an external guide to prevent premature wear. To retrofit this as an ISO 15552 replacement, match the 100 mm bore, 350 mm stroke, PT1/2 port, and your required mounting accessory.
Quick checklist
The SE100X350 generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N. The maximum operating pressure is 1.0 MPa, which yields a maximum push force of 801 kgf.
Yes, the SE100X350 is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing you to use existing mounting hardware. This specific SKU does not include the -S magnet, meaning it is not equipped for CMSE or DMSE position sensors out of the box.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.