Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B
The ACEJ16X60-10B is a double acting compact cylinder built to ISO 21287, with a 16 mm bore, 60 mm stroke and a male-threaded 8 mm rod (the B code). An external stop screw trims the extend stroke by up to 10 mm on site, so the usable extend range is 50-60 mm without changing the cylinder. At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa those rise to 140.7 N and 105.6 N, with a theoretical maximum of 20.5 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into slim fixtures, guarding and pick stations where a full-length body cannot. The hard-anodized aluminium body carries an S45C hard-chrome rod, a fixed TPU bumper at each end, and runs 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B Technical Specifications
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B Is Used
Gate or lid present check
Toggling a small guard door or test lid in a semi-automatic jig; with the optional -S magnet ordered, CMSE / DMSE switches confirm end positions on the 60 mm stroke.
Is the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B the Right Cylinder?
If your load must stay put during a pause, remember the stop screw is a mechanical end stop for the extend stroke only - it does not lock the piston mid-stroke, and on air loss the rod still drifts. Mounting bolts straight to the ISO 21287 face (FA flange, LB foot, FTC brackets, I/Y rod knuckles). This unit has no magnet; order the -S code if you later need CMSE / DMSE switch position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B FAQ
It is double acting with an adjustable extend stroke: the -10 stop screw trims the 60 mm stroke by up to 10 mm, giving a 50-60 mm usable range. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, port M5x0.8, rod 8 mm male thread (B code).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and guards. A fixed TPU bumper at each end absorbs end-of-stroke energy. FA flange, LB foot, FTC brackets and I/Y rod knuckles bolt to the standard face. Position sensing needs the optional -S magnet code - this model (no S) has no magnet, so CMSE / DMSE switches cannot be fitted unless you order the -S version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ12 Adjustable Compact Cylinder ACEJ16X60-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.