This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X10, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X10
The AirTAC ACP Compact Cylinder ACP63X10 is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X10 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X10
The ACP63X10 is a double acting compact cylinder in the discontinued AirTAC ACP DIN-standard series, with a 63 mm bore and a short 10 mm stroke. At 0.5 MPa it pushes with 1558.6 N and pulls with 1458.1 N; at 0.7 MPa those figures rise to 2182.1 N and 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. Its hard-anodized aluminium body and S45C hard-chrome rod suit fast, repetitive clamping at 30-500 mm/s under 0.15-1.0 MPa (22-145 psi) air pressure.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and gantry pick points a full-length body cannot reach. A fixed TPU bumper sits at both ends, and the rod ends in a female M10x1.5 thread. Note: this model is discontinued - the current-production direct is ACE63X10, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X10 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X10 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X10 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X10 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X10 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X10
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X10 Is Used
Press-fit staking of bushings
The 1558.6 N push at 0.5 MPa seats small bushings and dowels in aluminium housings, and the 10 mm stroke keeps the cycle fast on repetitive assembly lines.
Short-throw clamp on CNC fixtures
With about 95 kg of usable work force and a compact body roughly 50% shorter than an ISO 15552 profile cylinder, it clamps workpieces where fixture height is limited.
Case kick-off on packaging lines
A 10 mm kick at up to 500 mm/s nudges cartons or trays off a conveyor stop, with the 1/8" port keeping plumbing simple in tight machine frames.
Replacing the Airtac ACP Compact Cylinder ACP63X10 with the ACE63X10
At 63 mm bore this sits in the mid-heavy force band: if 1558.6 N of push at 0.5 MPa is more than your jig needs, a 50 mm bore (981.7 N) saves space; if you need more, an 80 mm bore delivers 2513.3 N. The 10 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it is a catalog item, not a made-to-order build. Remember that a plain ACP63X10 drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Mount it with FA/FB flange, LB foot or CA/CB clevis brackets, and order the -S code if you want the optional magnet for CMSE / DMSE switches; without -S there is no magnet. For new projects, specify ACE63X10 instead, since ACP is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACE63X10
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X10 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. It is a double acting compact cylinder, 63 mm bore, 10 mm stroke, 16 mm rod with female M10x1.5 thread, 1/8" port, operating on 0.15-1.0 MPa (22-145 psi) filtered air, speed 30-500 mm/s, temperature -20 to +70 C, with a fixed TPU bumper at both ends. The model is discontinued; ACE63X10 is the current replacement.
FA/FB flange, LB foot and CA/CB clevis brackets bolt to the standard mounting face, and the short body saves about 50% of the length of an ISO 15552 profile cylinder in tight frames. Position sensing requires the optional -S magnet code at ordering; only then can CMSE or DMSE switches be fitted - without -S there is no magnet. Since the ACP is discontinued, confirm ISO 21287 mounting dimensions of the ACE63X10 successor before designing it in.
Request a Quote for the ACE63X10
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X10 replacement — usually within 7-8 hours.