This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X100SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X100SB
The AirTAC ACP Compact Cylinder ACP63X100SB is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X100SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X100SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X100SB
A double acting compact cylinder with a 63 mm bore and 100 mm stroke, the ACP63X100SB pushes with 1558.6 N and pulls with 1458.1 N at 0.5 MPa, rising to 2182.1 N on the extend stroke at 0.7 MPa. Its hard-anodized aluminium body with an S45C hard-chrome rod is an ISO 21287 short build, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and fixture plates. The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the barrel for end-of-stroke signalling.
The B code gives a male 16 mm rod thread with M10x1.5 female thread option, and the 1/8" port serves this bore size. Fixed TPU bumpers at both ends take the end-of-travel shock, but they never hold a load: if air is lost the piston drifts, so add a rod lock or pilot check valve where a held position matters. As a planning figure, treat about 935 N (roughly 95 kg of vertical lift) as the usable output at 0.5 MPa instead of the full 317.9 kgf theoretical maximum. Note that this model is discontinued; the current-production direct is ACE63X100, and you should confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X100SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X100SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X100SB |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X100SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X100SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X100SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X100SB Is Used
Clamping fixture on a CNC machining centre
The 1558.6 N push at 0.5 MPa clamps steel housings in a machining fixture, and the short ISO 21287 body fits where a full-length profile cylinder would foul the fixture plate.
Carton press-down station on a packaging line
A 100 mm stroke presses flaps or inserts at 30-500 mm/s, while the fitted -S magnet feeds a CMSE switch signal to the PLC for cycle confirmation.
Pallet-stacker fork positioner
The 63 mm bore shifts fork rails laterally with about 935 N of practical working force at 0.5 MPa, using LB foot mounting on the carriage frame.
Replacing the Airtac ACP Compact Cylinder ACP63X100SB with the ACE63X100SB
At 0.5 MPa this bore delivers 1558.6 N push and 1458.1 N pull. If your load needs under about 980 N, the 50 mm bore (981.7 N push) is the leaner choice; if you need over 2100 N, step up to the 80 mm bore (2513.3 N push). The 100 mm stroke sits well inside the 250 mm maximum standard stroke for this bore, so no made-to-order length is needed. Pick FA/FB flange, LB foot or CA/CB clevis mounting to match the fixture, and keep the S code if CMSE or DMSE switch feedback is required. This model is discontinued, so specify ACE63X100 for new builds and verify the ISO 21287 mounting footprint before the swap.
Replacement checklist
- ✓ Current-production ACE → ACE63X100SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X100SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N and 2041.3 N. The theoretical maximum at 1.0 MPa is 317.9 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
Order ACE63X100, the current-production ISO 21287 successor: swap the P for an E and you get the same 63 mm bore, 100 mm stroke and force class in a matching short body. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions and the FA/FB, LB or CA/CB bracket interface before switching.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X100SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X100SB replacement — usually within 7-8 hours.