This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X110, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X110
The AirTAC ACP Compact Cylinder ACP63X110 is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X110 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X110
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X110
The ACP63X110 is a double acting compact cylinder in the discontinued AirTAC ACP series, built to the DIN-standard short-body format with a hard-anodized aluminium body, S45C hard-chrome piston rod and a fixed TPU bumper at each end. At 63 mm bore it pushes 1558.6 N and pulls 1458.1 N at 0.5 MPa, rising to 2182.1 N at 0.7 MPa, with a theoretical peak of 317.9 kgf at 1.0 MPa. The 110 mm stroke sits well inside the 250 mm standard range for this bore, and the 1/8" port serves air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
Because the short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, this 63 mm unit slots into tight clamping fixtures and gantry frames where a full-length cylinder cannot. Note this unit has no magnet fitted: order the -S code if you need CMSE or DMSE switch sensing. The ACP63X110 is discontinued, and the current-production direct is the ACE63X110 - confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X110 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X110 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X110 |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X110 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X110 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X110
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X110 Is Used
CNC fixture clamping
The 1558.6 N push at 0.5 MPa clamps aluminium housings in machining fixtures, and the short body fits between fixture plates where a full-length cylinder will not.
Packaging line pushers
With a 110 mm stroke and 30-500 mm/s speed range, the cylinder ejects cartons or trays sideways on food and beverage packaging conveyors.
Press-fit assist stations
Around 95 kg of usable working force at 0.5 MPa suits light press-fit and staking operations on small assembly cells in electronics and appliance plants.
Replacing the Airtac ACP Compact Cylinder ACP63X110 with the ACE63X110
At 63 mm bore you get 1558.6 N push at 0.5 MPa; if that is more than the job needs, the 50 mm bore delivers 981.7 N, and the 80 mm bore reaches 2513.3 N for heavier clamping. The 110 mm stroke is a standard length (max standard for bore 63 is 250 mm), so no made-to-order build is required. Keep in mind that when air is lost the piston drifts freely - for a held load add a rod lock or pilot check valve. FA/FB flange, LB foot and CA/CB clevis mounts plus I/Y rod knuckles bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches. For new projects, specify the ACE63X110 instead, which matches this bore, stroke and force class.
Replacement checklist
- ✓ Current-production ACE → ACE63X110
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X110 FAQ
Push is 1558.6 N and pull 1458.1 N at 0.5 MPa; at 0.7 MPa push rises to 2182.1 N and pull to 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. It is a double acting compact cylinder, 63 mm bore, 110 mm stroke, 16 mm rod with M10x1.5 female rod thread, 1/8" port, operating on 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s from -20 to +70 C. The model is discontinued; the ACE63X110 is the current replacement.
The short DIN-standard body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow fixtures and tight machine frames. Sensing is not included by default: the magnet is the optional -S ordering code, and only with -S can CMSE or DMSE reed or solid-state switches be mounted on the body. Mounting options include FA/FB flange, LB foot and CA/CB clevis.
Request a Quote for the ACE63X110
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X110 replacement — usually within 7-8 hours.