This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X110SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X110SB
The AirTAC ACP Compact Cylinder ACP63X110SB is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X110SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X110SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X110SB
The ACP63X110SB is a double acting compact cylinder in the DIN-standard ACP series, with a 63 mm bore and 110 mm stroke driving a 16 mm hard-chrome S45C rod. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N and 2041.3 N, with a theoretical ceiling of 317.9 kgf at 1.0 MPa. The male rod thread (B code) and 1/8" ports suit valve manifolds and fixture plumbing alike. Note that this model is discontinued: the current-production direct is ACE63X110, so confirm ISO 21287 mounting dimensions before swapping.
Because the short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight gantries and guarding where a full-length body will not fit. The -S code on this unit means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the hard-anodized aluminium body. A fixed TPU bumper sits at both ends, and speed runs 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).
Airtac ACP Compact Cylinder ACP63X110SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X110SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X110SB |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X110SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X110SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X110SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X110SB Is Used
CNC fixture clamping
With 1558.6 N of push at 0.5 MPa, the 63 mm bore clamps steel housings in machining fixtures, and the 110 mm stroke clears part loading by hand.
Press-fit assist ram
The 2182.1 N available at 0.7 MPa suits light press-fit and staking jobs on small bearing or bushing assemblies where a full press is overkill.
Replacing the Airtac ACP Compact Cylinder ACP63X110SB with the ACE63X110SB
At 63 mm bore this sits in the mid-heavy band of the range: a 50 mm bore gives 981.7 N push at 0.5 MPa if you need less force, while an 80 mm bore delivers 2513.3 N when the load grows. The 110 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so no made-to-order build is needed. Remember that a plain cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face, and the ACE63X110 is the current replacement to order going forward.
Replacement checklist
- ✓ Current-production ACE → ACE63X110SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X110SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa, 2182.1 N push and 2041.3 N pull; theoretical maximum is 317.9 kgf at 1.0 MPa. The ACP family is discontinued, so order the ACE63X110 as the current direct and confirm the ISO 21287 mounting dimensions first, since the ACP was built to a DIN standard.
It is a compact double-acting cylinder with a hard-anodized aluminium body, 16 mm hard-chrome rod, male rod thread, 1/8" ports and a fixed TPU bumper at each end - it is about 50% shorter in mounting length than an ISO 15552 profile cylinder. The -S code means the magnet is fitted, so CMSE or DMSE switches can be clipped on; operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X110SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X110SB replacement — usually within 7-8 hours.