This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X300SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X300SB
The AirTAC ACP Compact Cylinder ACP63X300SB is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 300mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X300SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X300SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X300SB
The ACP63X300SB is a double acting compact cylinder in the DIN-standard ACP series, with a 63 mm bore and a 300 mm stroke that exceeds the 250 mm standard limit for this bore, so it is made to order. At 0.5 MPa it pushes with 1558.6 N and pulls with 1458.1 N, rising to 2182.1 N push at 0.7 MPa. Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight gantries and guarding where a full-length body cannot fit.
The B code gives a male 16 mm rod thread, and the S code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted for end-of-stroke sensing. Running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), it covers 30-500 mm/s between fixed TPU bumpers. This model is discontinued: the current direct is ACE63X300, and buyers should confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X300SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X300SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X300SB |
| Bore size | Ø63 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X300SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X300SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X300SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X300SB Is Used
Pallet pusher on wrapping machines
The 1558.6 N push at 0.5 MPa slides a loaded pallet onto a stretch-wrapper conveyor, and the 300 mm stroke clears the full pallet width in one move.
Bottle-crate ejection at filling lines
A male-thread rod drives a kicker plate that pushes stacked PET crates off the lane; the short body fits inside the line guarding.
Press-fit assist for bushings
With about 95 kg of usable vertical force at 0.5 MPa, the cylinder seats bronze bushings into pump housings before final pressing.
Replacing the Airtac ACP Compact Cylinder ACP63X300SB with the ACE63X300SB
Size both ways: a 50 mm bore gives 981.7 N push at 0.5 MPa, while an 80 mm bore reaches 2513.3 N, so pick 63 mm when your load sits between those figures. Remember a plain unit of this type drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. The 300 mm stroke is non-standard for this bore and built to order. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face family, and the -S magnet enables CMSE / DMSE switches. For new projects order ACE63X300, the current-production replacement.
Replacement checklist
- ✓ Current-production ACE → ACE63X300SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X300SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. It is double acting, runs at 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air, and the 300 mm stroke is a made-to-order length above the 250 mm standard for a 63 mm bore.
No. The ACP family is discontinued. The current-production direct is ACE63X300, which swaps the P for an E and matches the same bore, stroke and force class. Because the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions of the ACE before ordering, and note the -S magnet with CMSE / DMSE switch support is an ordered option, not standard on every unit.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X300SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X300SB replacement — usually within 7-8 hours.