This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X30B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X30B
The AirTAC ACP Compact Cylinder ACP63X30B is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X30B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X30B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X30B
The ACP63X30B is a double acting DIN-standard compact cylinder with a 63 mm bore and 30 mm stroke, delivering 1558.6 N of push force and 1458.1 N of pull force at 0.5 MPa. Its hard-anodized aluminium body with threaded aluminium covers keeps the mounting length roughly half that of an ISO 15552 profile cylinder, so it slots into tight gantries and fixture plates where a full-length cylinder will not fit. The male rod thread (B code) on the 16 mm rod lets you bolt I/Y knuckles straight on.
At 0.7 MPa the same bore reaches 2182.1 N push and 2041.3 N pull, with a theoretical maximum of 317.9 kgf at 1.0 MPa. Note this model is discontinued: the current-production direct is the ISO 21287 ACE63X30, so confirm mounting dimensions before swapping. The optional -S magnet code enables CMSE / DMSE switches; without it no magnet is fitted.
Airtac ACP Compact Cylinder ACP63X30B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X30B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X30B |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X30B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X30B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X30B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X30B Is Used
CNC fixture clamping
The 1558.6 N push force at 0.5 MPa clamps steel housings in a machining fixture, and the short ISO 21287 body fits between the vise and the guard.
Packaging line pusher
A 30 mm stroke is enough to kick cartons off a conveyor lane; the fixed TPU bumper decelerates the rod at both ends of each 30-500 mm/s cycle.
Pallet gate actuator
In a warehouse gate arm, the male rod thread takes a clevis knuckle directly, and the 1/8" port keeps plumbing compact on the machine frame.
Replacing the Airtac ACP Compact Cylinder ACP63X30B with the ACE63X30B
Size both ways before committing: a 50 mm bore gives 981.7 N push at 0.5 MPa, while an 80 mm bore raises it to 2513.3 N - pick the 63 mm when your load sits between those bands. The 30 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it is a catalogue item, not made to order. Mounting options include FA/FB flange, LB foot and CA/CB clevis, all matching the ISO 21287 face. Remember that a plain cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Order the ACE63X30 as the current replacement for this discontinued model.
Replacement checklist
- ✓ Current-production ACE → ACE63X30B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X30B FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
Sensors are only possible with the optional -S magnet code, which allows CMSE or DMSE reed and solid-state switches; this model (no S) has no magnet. The ACP63X30B itself is discontinued - the current direct is the ISO 21287 ACE63X30 in the same bore, stroke and force class. Confirm ISO 21287 mounting dimensions before the swap.
Request a Quote for the ACE63X30B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X30B replacement — usually within 7-8 hours.