This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X30SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X30SB
The AirTAC ACP Compact Cylinder ACP63X30SB is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X30SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X30SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X30SB
The ACP63X30SB is a double acting DIN-standard compact cylinder with a 63 mm bore and a short 30 mm stroke. Its hard-anodized aluminium body with an S45C hard-chrome rod saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guarding where a full-length body will not fit. The male rod thread (B code) and the fitted -S magnet let CMSE or DMSE switches report end positions directly.
At 0.5 MPa this bore pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N. Note the fixed TPU bumper only decelerates the rod at each end - it never holds a load if air is lost. This model is discontinued; the current-production direct is the ISO 21287 ACE63X30, so confirm mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X30SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X30SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X30SB |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X30SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X30SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X30SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X30SB Is Used
Pallet clamp fixture
Clamps aluminium pallets on a CNC machining line, where the 1558.6 N push at 0.5 MPa holds parts firmly and the 30 mm stroke keeps the fixture footprint small.
Bottle-lane divert gate
Swings a divert gate on a beverage bottling conveyor; the short ISO 21287-class body fits between guide rails and the -S magnet confirms gate position via a DMSE switch.
Press-fit ejection ram
Ejects finished bushings from a small assembly press die, using the 2182.1 N push at 0.7 MPa and the male rod thread to couple a knuckle to the ejector plate.
Replacing the Airtac ACP Compact Cylinder ACP63X30SB with the ACE63X30SB
Size both ways: a 50 mm bore gives 981.7 N push at 0.5 MPa, while an 80 mm bore reaches 2513.3 N - pick the 63 mm when you need the middle band around 1558.6 N. If the load must stay put on air loss, add a rod lock or pilot check valve, since this cylinder drifts when the valve centres. The -S magnet on this unit pairs with CMSE / DMSE switches, and FA/FB flange, LB foot or CA/CB clevis mounts bolt to the same face. Order ACE63X30 instead - ACP is out of production.
Replacement checklist
- ✓ Current-production ACE → ACE63X30SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X30SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The model is discontinued - order the ACE63X30, the current ISO 21287 direct in the same bore, stroke and force class, and confirm mounting dimensions before the swap.
It is a short-body compact cylinder with a hard-anodized aluminium body, S45C hard-chrome rod, 1/8" PT ports and a fixed TPU bumper at both ends that only decelerates the rod. This unit carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches can be mounted; operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X30SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X30SB replacement — usually within 7-8 hours.