This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X5, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X5
The AirTAC ACP Compact Cylinder ACP63X5 is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 5mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X5 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke5 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X5
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X5
The ACP63X5 is a double acting compact cylinder in the discontinued AirTAC ACP DIN-standard series, with a 63 mm bore and a very short 5 mm stroke. It pushes with 1558.6 N and pulls with 1458.1 N at 0.5 MPa, rising to 2182.1 N push at 0.7 MPa. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight clamping fixtures where a full-length body will not fit.
The 16 mm hard-chrome S45C rod ends in a female M10x1.5 thread, air ports are 1/8", and a fixed TPU bumper sits at both ends. This model has no magnet fitted; order the -S code if you need CMSE or DMSE switch sensing. ACP63X5 is discontinued - the current-production direct is ACE63X5, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X5 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X5 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X5 |
| Bore size | Ø63 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X5 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X5 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X5
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X5 Is Used
Short-stroke clamp on a machining fixture
The 1558.6 N push at 0.5 MPa clamps aluminium housings against a hard stop in a CNC milling jig, with the 5 mm stroke clearing part loading in milliseconds.
Presence / reject gate on a packaging line
A 5 mm kick moves a diverter flag to reject a mislabelled carton at up to 500 mm/s, and the compact body fits inside the guard frame.
Replacing the Airtac ACP Compact Cylinder ACP63X5 with the ACE63X5
At 63 mm bore this sits above the 50 mm size (981.7 N push at 0.5 MPa) and below the 80 mm size (2513.3 N push at 0.5 MPa), so pick it when your clamp or press needs roughly 1.5 kN of push. The 5 mm stroke suits short-throw locating and part-present moves. Remember a plain ACP63X5 drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the standard face, and the -S magnet code enables CMSE / DMSE switches. For new designs, order ACE63X5 instead.
Replacement checklist
- ✓ Current-production ACE → ACE63X5
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X5 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 63 mm bore takes 1/8" ports. A practical working push is about 935 N (roughly 95 kg of force).
No - the ACP63X5 is discontinued. The current-production replacement is ACE63X5, an ISO 21287 compact cylinder in the same 63 mm bore, 5 mm stroke and force class. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions before swapping. The ACE keeps the short body that saves about 50% of the length of an ISO 15552 profile cylinder, plus the same FA/FB, LB and CA/CB mounting family.
Request a Quote for the ACE63X5
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X5 replacement — usually within 7-8 hours.