This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X60, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X60
The AirTAC ACP Compact Cylinder ACP63X60 is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X60 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X60
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X60
A double acting compact cylinder in the DIN-standard ACP series, the ACP63X60 pairs a 63 mm bore with a 60 mm stroke and delivers 1558.6 N of push force and 1458.1 N of pull force at 0.5 MPa, rising to 2182.1 N at 0.7 MPa. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames and fixture plates. Its hard-anodized aluminium body carries aluminium covers threaded on, with an S45C hard-chrome rod and a fixed TPU bumper at each end.
This model is discontinued; the current-production replacement is ACE63X60, which matches the same bore, stroke and force class. Air supply is 0.15-1.0 MPa (22-145 psi), speed range is 30-500 mm/s, and the port is 1/8". Confirm ISO 21287 mounting dimensions before swapping from the ACP.
Airtac ACP Compact Cylinder ACP63X60 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X60 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X60 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X60 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X60 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X60
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X60 Is Used
Pallet clamping on a CNC machining line
With 1558.6 N push at 0.5 MPa, the 63 mm bore clamps aluminium pallets in machining fixtures, and the short body fits inside the fixture plate where a full-length profile cylinder would not.
Packaging case reject pusher
The 60 mm stroke kicks misaligned cartons off a conveyor at up to 500 mm/s, with the fixed TPU bumper damping the rod at each end of travel.
Guide-roll tensioning on a material handling frame
Pull force of 1458.1 N at 0.5 MPa tensions chain or belt guides on warehouse handling equipment; the CA/CB clevis mount suits the pivoting linkage.
Replacing the Airtac ACP Compact Cylinder ACP63X60 with the ACE63X60
At 63 mm bore this sits between the 50 mm (981.7 N push at 0.5 MPa) and 80 mm (2513.3 N) sizes; pick 50 mm if your load needs under about 590 N of working force, or step up to 80 mm for heavier presses and lifts. Note that a plain ACP does not hold position when air is lost - for a suspended load add a rod lock or pilot check valve. The 60 mm stroke is well inside the 250 mm maximum standard stroke for this bore. Mounting options are FA/FB flange, LB foot and CA/CB clevis; the optional -S magnet enables CMSE / DMSE switches, and without -S there is no magnet. Order ACE63X60 as the current direct successor.
Replacement checklist
- ✓ Current-production ACE → ACE63X60
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X60 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. It is a double acting cylinder with a 63 mm bore, 60 mm stroke, 16 mm rod, 1/8" port and female M10x1.5 rod thread.
No - the ACP family is discontinued. The current-production direct is ACE63X60 (swap the P for an E), an ISO 21287 compact cylinder in the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP was built to a DIN standard. FA/FB flange, LB foot and CA/CB clevis mounts carry over, and the optional -S magnet enables CMSE / DMSE switches.
Request a Quote for the ACE63X60
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X60 replacement — usually within 7-8 hours.