This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X60S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X60S
The AirTAC ACP Compact Cylinder ACP63X60S is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X60S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X60S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X60S
Double acting on a 63 mm bore, the ACP63X60S pushes 1558.6 N and pulls 1458.1 N at 0.5 MPa, rising to 2182.1 N at 0.7 MPa. The 60 mm stroke sits well inside the 250 mm standard range for this bore, and the short ISO 21287-class body cuts roughly half the mounting length of an ISO 15552 profile cylinder, so it slots into tight welding jigs and press fixtures. Air supply is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and rod speed runs 30-500 mm/s.
The S code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches mount directly on the hard-anodized aluminium body for end-of-stroke signalling. The S45C hard-chrome rod ends in a female M10x1.5 thread, and fixed TPU bumpers pad both ends. Note this model is discontinued: the current direct is ACE63X60, same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X60S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X60S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X60S |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X60S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X60S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X60S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X60S Is Used
Clamping on CNC machining fixtures
1558.6 N of push at 0.5 MPa holds steel housings against hard stops in a milling fixture, and the 60 mm stroke clears chip covers in tight cells.
Pallet-stacker gate actuation
The 63 mm bore swings safety gates and load back-rests on warehouse trucks, with CMSE switches on the -S magnet confirming gate position to the controller.
Replacing the Airtac ACP Compact Cylinder ACP63X60S with the ACE63X60S
If 1558.6 N at 0.5 MPa is more than the job needs, the 50 mm bore gives 981.7 N push; if it is not enough, step up to the 80 mm bore for 2513.3 N. Both share the 1/8" port of this 63 mm model. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face, and the -S magnet this model carries works with CMSE / DMSE switches. Order ACE63X60 as the current-production replacement.
Replacement checklist
- ✓ Current-production ACE → ACE63X60S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X60S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa, 2182.1 N push and 2041.3 N pull; theoretical maximum is 317.9 kgf at 1.0 MPa. The model is discontinued - the current-production replacement is ACE63X60, an ISO 21287 direct in the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before ordering the swap.
The S in the code means the optional -S magnet is fitted on this unit, so CMSE reed or DMSE solid-state switches clip onto the body to signal extend and retract. Without the -S code there is no magnet. The fixed TPU bumpers only soften end-of-travel; they do not hold the piston, so use a rod lock or pilot check valve where a load must stay in place.
Request a Quote for the ACE63X60S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X60S replacement — usually within 7-8 hours.