This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X200SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X200SB
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X200SB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X200SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X200SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X200SB
A double acting compact cylinder with a rod leaving both covers, the ACPD16X200SB delivers the same 75.4 N in each direction at 0.5 MPa (105.6 N at 0.7 MPa), because both strokes work on the rod-side area of the 16 mm bore. The through-rod resists rotation and side load, gives a symmetric mounting point at each end, and lets the rear rod carry a sensor flag, while fixed TPU bumpers decelerate the piston at both ends. Its hard-anodized aluminium body with an S45C hard-chrome rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
The 200 mm stroke is a made-to-order length for this bore, whose standard range tops out at 75 mm, so plan lead time accordingly. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which suits slim gantries and guarded stations. Note the ACPD family is discontinued; the current direct is ACED16X200, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD16X200SB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X200SB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X200SB |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X200SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X200SB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X200SB Is Used
Compact ejection station
Equal 75.4 N push and pull at 0.5 MPa suits a plastics assembly fixture that must eject and retract a part with identical force inside a narrow guard.
Position-flagged test rig
The fitted -S magnet plus DMSE switches reports both end positions on a laboratory cycling fixture running 30-500 mm/s, with the male rod thread taking a knuckle directly.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X200SB with the ACED16X200SB
Size between bores: the 12 mm ACPD gives 42.4 N at 0.5 MPa, while the 20 mm bore reaches 117.8 N, so pick the 16 mm when 75.4 N both ways covers the job. Because a plain double-rod cylinder drifts when air is lost, add a rod lock or pilot check if the load must stay put. This -S version carries the optional magnet for CMSE / DMSE switches, and the B code gives a male 8 mm rod thread. Order ACED16X200 as the current-production replacement.
Replacement checklist
- ✓ Current-production ACE → ACED16X200SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X200SB FAQ
Output is equal both ways because the rod-side area works on each stroke: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa, with a maximum of 15.4 kgf at 1.0 MPa. The 8 mm rod exits both covers, the port is M5x0.8, and the 200 mm stroke is a non-standard made-to-order length for this 16 mm bore.
The short ISO 21287-class aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA/FB flange or LB foot mounting and a fixed TPU bumper at each end. The ACPD is discontinued; the current direct is ACED16X200, so confirm ISO 21287 mounting dimensions before ordering.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X200SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X200SB replacement — usually within 7-8 hours.