This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED20X200, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD20X200
The AirTAC ACPD Double Rod Compact Cylinder ACPD20X200 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø20mm bore and 200mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED20X200 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ20 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- StatusDiscontinued → ACED20X200
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD20X200
A double acting compact cylinder with a rod leaving both covers, the ACPD20X200 pushes and pulls with identical force because each stroke works on the rod-side area: 117.8 N at 0.5 MPa and 164.9 N at 0.7 MPa. The 20 mm bore drives a 10 mm rod through a 200 mm stroke, which is beyond the 100 mm standard limit for this bore, so it is a made-to-order length. Air supply is 0.15-1.0 MPa (22-145 psi) and speed runs 30-500 mm/s.
The through-rod resists rotation and side load and gives a symmetric mount, while the rear rod can carry a sensor flag in a pick-and-place gantry. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and the fixed TPU bumper at each end absorbs end-of-travel shock. At 0.5 MPa, plan on roughly 70 N (about 7 kg) of usable vertical work rather than the full rating. This model is discontinued; the current direct is ACED20X200, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD20X200 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD20X200 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED20X200 |
| Bore size | Ø20 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED20X200 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD20X200
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 20 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD20X200 Is Used
Reciprocating electronics tray transfer
The through-rod drives a tray shuttle between two test stations with equal 117.8 N force in each direction, so return stroke speed matches the push without tuning.
Symmetric part ejection on a rotary dial table
Rods on both covers let the fixture eject a machined bushing from either side of the dial, with the rear rod doubling as a mount for a CMSE switch flag when the -S magnet is ordered.
Laboratory sample pusher with mirrored action
A 200 mm made-to-order stroke slides sample racks into and out of an analyzer enclosure, and the 7 kg usable vertical capacity covers light rack handling.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD20X200 with the ACED20X200
Size between bores: a 16 mm ACPD gives 75.4 N at 0.5 MPa, while a 25 mm bore reaches 206.2 N, so the 20 mm sits between for light clamping and transfer. The 200 mm stroke is non-standard for this bore and is built to order. FA/FB flange and LB foot mountings bolt to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches - this code has no magnet fitted. Note that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check for held loads. Order ACED20X200 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACED20X200
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD20X200 FAQ
Because a rod exits both covers, force is equal both ways: 117.8 N at 0.5 MPa and 164.9 N at 0.7 MPa, with a maximum of 24.0 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 200 mm stroke is a made-to-order length above the 100 mm standard limit for a 20 mm bore.
The hard-anodized aluminium body follows the short ISO 21287-class format, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to soften end-of-travel impact. FA/FB flange and LB foot mountings fit the standard face, the rod thread is female M6x1.0, the port is M5x0.8 PT, and the optional -S magnet enables CMSE / DMSE switches. This model is discontinued - order ACED20X200 and confirm ISO 21287 mounting dimensions.
Related AirTAC ACE Cylinders
Request a Quote for the ACED20X200
Send us the quantity and destination. We confirm price, stock and lead time on the ACED20X200 replacement — usually within 7-8 hours.