This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED25X60S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD25X60S
The AirTAC ACPD Double Rod Compact Cylinder ACPD25X60S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø25mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED25X60S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ25 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- StatusDiscontinued → ACED25X60S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD25X60S
A double acting compact cylinder with a rod leaving both covers, the ACPD25X60S pushes and pulls with identical force because each stroke works on the rod-side area: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in either direction. The through-rod resists rotation and light side load, gives a symmetric mounting point at each end, and lets the rear rod carry a sensor flag. A fixed TPU bumper sits at both covers, and travel runs 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore suits tight jigs and guarded stations. The S code on this model means the optional magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped on. Note that this ACPD is discontinued: the current-production direct is ACED25X60, same bore, stroke and force class, so confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD25X60S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD25X60S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED25X60S |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED25X60S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD25X60S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD25X60S Is Used
Fixture clamping in tight dies
The 206.2 N symmetric push clamps small brackets in a press die, and the short body fits where a full-length cylinder cannot.
Push-pull parts transfer
With equal force both ways, the through-rod slides a plastic tray between two conveyor lanes on a packaging line.
Position-flagged test station
The fitted -S magnet drives a DMSE switch so a PLC confirms end-of-stroke on a leak-test gantry.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD25X60S with the ACED25X60S
At 206.2 N per side at 0.5 MPa, bore 25 covers small clamping and transfer jobs; step down to bore 20 (117.8 N) for lighter fixtures or up to bore 32 (345.6 N) when the load grows. The 60 mm stroke sits well inside the 150 mm standard limit for this bore, so no made-to-order build is needed. This unit carries the optional -S magnet, so CMSE / DMSE switches will read position directly. Remember the piston drifts if air is lost, so add a rod lock or pilot check for a held load. For new projects, order ACED25X60 instead.
Replacement checklist
- ✓ Current-production ACE → ACED25X60S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD25X60S FAQ
Because a rod exits both covers, output is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa on each stroke, with a peak of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, rod 10 mm, female M6x1.0 thread, M5x0.8 port.
No, the ACPD family is discontinued. The current-production successor is ACED25X60, an ISO 21287 compact cylinder in the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP was built to a DIN-standard footprint.
Related AirTAC ACE Cylinders
Request a Quote for the ACED25X60S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED25X60S replacement — usually within 7-8 hours.