This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED25X75, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD25X75
The AirTAC ACPD Double Rod Compact Cylinder ACPD25X75 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø25mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED25X75 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ25 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- StatusDiscontinued → ACED25X75
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD25X75
A double acting compact cylinder with a rod exiting both covers, the ACPD25X75 delivers 206.2 N at 0.5 MPa in either direction because both strokes work on the rod-side area. The 25 mm bore and 75 mm stroke suit short-stroke clamping and reciprocating tasks, and the through-rod resists rotation and side load while the rear rod can carry a sensor flag. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi) of clean air.
The hard-anodized aluminium body with an S45C hard-chrome rod has a short ISO 21287-class build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures. This model is discontinued: the current-production direct is ACED25X75, so confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD25X75 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD25X75 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED25X75 |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED25X75 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD25X75
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD25X75 Is Used
Bench press fixture
The 206.2 N both-ways force at 0.5 MPa clamps small aluminium brackets on a drill bench, and the 75 mm stroke clears part loading by hand.
Conveyor push-off station
A through-rod on a bottling line pushes rejected cartons sideways off the belt; the symmetric rod mount keeps the pusher plate square without extra guides.
Gantry flip mechanism
With a rod at each end of a small assembly gantry, one rod lifts a workpiece while the rear rod carries a flag past a position sensor on the opposite side.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD25X75 with the ACED25X75
Size both ways: if 206.2 N at 0.5 MPa is more than the job needs, the ACPD20X75 gives 117.8 N in the same stroke; if the load is heavier, step up to the ACPD32X75 for 345.6 N. Remember the piston drifts when air is lost, so add a rod lock or pilot check if the load must be held. FA/FB flange and LB foot mountings bolt to the standard face, and CMSE / DMSE switches work only when the optional -S magnet is ordered - this code has none. Order ACED25X75 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACED25X75
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD25X75 FAQ
Because a rod exits both covers, force is equal in both directions: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Both strokes use the rod-side area of the 25 mm bore, so there is no push-versus-pull difference.
No - the ACPD family is discontinued. The current-production direct is ACED25X75 (swap the P for an E), which matches the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP was built to a DIN-standard footprint.
Request a Quote for the ACED25X75
Send us the quantity and destination. We confirm price, stock and lead time on the ACED25X75 replacement — usually within 7-8 hours.