This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X100-20, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X100-20
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X100-20 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 100mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X100-20 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X100-20
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X100-20
The ACPJ16X100-20 is a double acting compact cylinder with an adjustable extend stroke: a stop screw trims the 100 mm stroke by up to 20 mm on site, giving a usable range of 80-100 mm. It is discontinued, and the current-production drop-in is the ACEJ16X100 in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping, since the ACP body follows the older DIN standard.
At 0.5 MPa this 16 mm bore pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it reaches 140.7 N push and 105.6 N pull, with a theoretical ceiling of 20.5 kgf at 1.0 MPa. A practical rule of thumb: plan for roughly 60 N of real work, which lifts about 5 kg vertically with a 2:1 margin. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries. Note the 100 mm stroke exceeds the 75 mm standard maximum for this bore, so it is made to order.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X100-20 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X100-20 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X100-20 |
| Bore size | Ø16 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X100-20 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X100-20
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X100-20 Is Used
Fixture clamping on CNC jigs
The 80-100 mm adjustable range lets a machinist trim clamp travel to the fixture without changing cylinders; 100.5 N push at 0.5 MPa suits light hold-down of aluminium brackets.
Carton ejector on a packing line
Pushes filled cartons off a conveyor stop at up to 500 mm/s, with the 20 mm window tuned so the stroke clears the box exactly.
Sample lift in a lab automation module
Lifts about 5 kg vertically with a 2:1 margin, and the short body fits inside a compact analysis enclosure where a full-length profile cylinder cannot.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X100-20 with the ACEJ16X100-20
Size both ways before ordering: the 12 mm bore gives 56.5 N push at 0.5 MPa, while the 20 mm bore delivers 157.1 N - pick the 16 mm when your part weight sits under about 60 N of working force. The stop screw only shortens the extend stroke within the 20 mm window; it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. This unit has no magnet (no S code), so no CMSE or DMSE switch can be fitted - order the -S variant if position sensing is needed. FA/FB flange and LB foot mounts bolt to the standard face. Replacement: ACEJ16X100.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X100-20
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X100-20 FAQ
Push is 100.5 N and pull is 75.4 N at 0.5 MPa; at 0.7 MPa push rises to 140.7 N and pull to 105.6 N, with a theoretical maximum of 20.5 kgf at 1.0 MPa. The -20 code gives a 20 mm adjustment window, so the extend stroke can be trimmed anywhere between 80 and 100 mm. The 100 mm stroke is a made-to-order length because the bore 16 standard maximum is 75 mm. Operating range is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
It is a short ISO 21287-class compact cylinder with a hard-anodized aluminium body, S45C hard-chrome rod, M5x0.8 ports, a female M4x0.7 rod thread and a fixed TPU bumper at each end that only decelerates at the ends of travel. Position sensing requires the optional -S magnet code, which enables CMSE or DMSE switches; this version has no magnet, so no sensor can be mounted. The model is discontinued - the current drop-in is the ACEJ16X100, so verify ISO 21287 mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X100-20
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X100-20 replacement — usually within 7-8 hours.