This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X110-10, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X110-10 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-10 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10
The ACPJ16X110-10 is a double acting compact cylinder with an adjustable extend stroke: a stop screw trims the 110 mm stroke by up to 10 mm, giving a usable 100-110 mm range. Pushing 100.5 N (pulling 75.4 N) at 0.5 MPa, it suits light clamping and positioning in tight fixtures. Its ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length body will not. The 110 mm stroke exceeds the 75 mm standard maximum for a 16 mm bore, so this unit is made to order.
Note this model is discontinued; the current-production drop-in is the ACEJ16X110, same bore, stroke and force class - confirm ISO 21287 mounting dimensions before swapping. The hard-anodized aluminium body carries an S45C hard-chrome rod with a female M4x0.7 thread and M5x0.8 ports. In practice, plan on roughly 60 N (about 6 kg of force) of real work at 0.5 MPa, and expect it to lift about 5 kg vertically with a 2:1 margin. A fixed TPU bumper sits at both ends, and the optional -S magnet enables CMSE / DMSE switches.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-10 |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-10 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10 Is Used
Small-part ejection from CNC fixtures
A 100.5 N push at 0.5 MPa ejects machined aluminium brackets off a locating pin, with the 10 mm window letting the operator trim the extend stroke to clear the fixture.
Lab sample press
About 6 kg of usable force at 0.5 MPa presses microscope-slide covers or test cassettes in a compact benchtop station where a 15552 profile body would not fit.
Carton flap tuck on a packing line
The 100-110 mm adjustable range tucks top flaps on cosmetic cartons at 30-500 mm/s, with the short ISO 21287 body sliding under a low guard rail.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10 with the ACEJ16X110-10
Size against neighbours: the 12 mm bore pushes 56.5 N at 0.5 MPa, while the 20 mm bore reaches 157.1 N - choose up if 100.5 N is marginal for your jig. The stop screw only shortens the extend stroke; it is not a mid-stroke lock, so the rod can drift if air is lost. FA/FB flanges and LB feet bolt to the ISO 21287 face. Order the -S code if you need magnet-based CMSE / DMSE sensing. For new designs, specify the ACEJ16X110 instead, as this ACPJ is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-10
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10 FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa push rises to 140.7 N and pull to 105.6 N. Theoretical maximum is 20.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the 110 mm stroke is a made-to-order length above the 75 mm standard maximum for this bore.
The -10 code gives a 10 mm window: an external stop screw shortens the 110 mm extend stroke to any length from 100 to 110 mm. It is a mechanical end stop, not a load-holding lock. This ACPJ is discontinued; the current drop-in is the ACEJ16X110 in the same bore, stroke and force class - confirm ISO 21287 mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-10
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-10 replacement — usually within 7-8 hours.