This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X110-100, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-100
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X110-100 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-100 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-100
The ACPJ16X110-100 is a double acting compact cylinder with an adjustable extend stroke: an external stop screw trims the 110 mm stroke by up to 100 mm, giving a usable range of 10-110 mm on site. At 0.5 MPa it pushes 100.5 N and pulls 75.4 N, rising to 140.7 N at 0.7 MPa, with a theoretical maximum of 20.5 kgf at 1.0 MPa. A fixed TPU bumper sits at both ends, and the 8 mm S45C hard-chrome rod carries a female M4x0.7 thread.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body cannot. Plan on roughly 60 N (about 6 kg) of real work at 0.5 MPa rather than the full rating, which equals lifting about 5 kg vertically with a 2:1 margin. Note that the 110 mm stroke exceeds the 75 mm standard maximum for bore 16, so this is a made-to-order build. This model is discontinued; the current-production replacement is the ACEJ16X110, and buyers should confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-100 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-100 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-100 |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-100 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-100
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-100 Is Used
Fixture clamp with trimmed stroke
The 100 mm window lets one cylinder serve several jig depths: set the stop screw anywhere from 10 to 110 mm to match part heights on a small machining fixture, using about 60 N of usable clamp force at 0.5 MPa.
Compact ejection on assembly stations
With a body roughly half the mounting length of an ISO 15552 profile cylinder, the 110 mm stroke pushes small components off a nest or chute where a full-length body would not fit.
Positioned feed with switch feedback
Order the -S magnet version to add CMSE or DMSE switches for end-of-stroke confirmation on a pick-and-place slide; this non-S build carries no magnet, so no sensor can be mounted.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-100 with the ACEJ16X110-100
Size between bores: an ACPJ12 gives 56.5 N push at 0.5 MPa, while stepping up to an ACPJ20 reaches 157.1 N, so the 16 mm bore at 100.5 N sits mid-range for light clamping and positioning. If you need the rod held under load, remember the stop screw only limits the extend stroke - it is not a mid-stroke lock, and the piston drifts if air is lost. Mount with FA/FB flanges or LB feet on the standard face; order the -S code if you want the optional magnet for CMSE / DMSE switches, since this version has no magnet. For new projects, specify the ACEJ16X110 instead - it is the current drop-in successor in the same bore, stroke and force class.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-100
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-100 FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it pushes 140.7 N and pulls 105.6 N; the theoretical maximum is 20.5 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 110 mm extend stroke to any length from 10 to 110 mm. It is a mechanical end stop only - on air loss the piston still drifts, so it never holds a load. The 110 mm stroke is a made-to-order size above the 75 mm standard maximum for bore 16.
No - the ACPJ family is discontinued. The current-production replacement is the ACEJ16X110, made by swapping the P for an E; it matches the same 16 mm bore, 110 mm stroke and force class in a short ISO 21287 body with FA/FB flange and LB foot options. Because the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions before swapping. Also note the magnet is optional: only the -S code accepts CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-100
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-100 replacement — usually within 7-8 hours.