This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X110-30SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-30SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-30SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB
The ACPJ16X110-30SB is a double acting compact cylinder with an adjustable extend stroke: the -30 stop screw trims the 110 mm stroke by up to 30 mm on site, giving a usable range of 80-110 mm. At 0.5 MPa the 16 mm bore delivers 100.5 N push and 75.4 N pull, rising to 140.7 N at 0.7 MPa. Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding where a full-length body cannot. Note the 110 mm stroke exceeds the 75 mm standard maximum for bore 16, so this is a made-to-order stroke.
This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted directly for end-of-stroke signalling, and the B code gives a male rod thread on the 8 mm rod. A fixed TPU bumper at each end decelerates the piston; it is a pad, not a brake, so on air loss the piston still drifts. The ACPJ family is discontinued - the current-production replacement is the ACEJ16X110, same bore, stroke and force class, but confirm the ISO 21287 mounting dimensions before swapping since the ACP was built to a DIN standard. As a planning figure, budget about 60 N (0.6 x the 100.5 N rating) of real work at 0.5 MPa, which lifts roughly 5 kg vertically with a 2:1 margin.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-30SB |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-30SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB Is Used
Width-adjustable clamping fixture
On a small CNC jig the 30 mm window lets one cylinder clamp parts from 80 to 110 mm tall; the 100.5 N push at 0.5 MPa is enough for light plastic or thin aluminium brackets.
Signalled ejector on a packaging line
With the -S magnet fitted, CMSE switches confirm each 80-110 mm extend stroke before a carton is released, and the male rod thread takes a knuckle for a pusher plate.
Compact press head for electronics assembly
The short body fits inside a benchtop press frame where an ISO 15552 profile cylinder would be about twice as long, delivering 140.7 N at 0.7 MPa for connector seating.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB with the ACEJ16X110-30SB
Size by force: at 0.5 MPa the 16 mm bore pushes 100.5 N, while a 12 mm bore gives 56.5 N and a 20 mm bore gives 157.1 N - step up to 20 mm if your jig needs more than about 60 N of working force. The 30 mm window suits stations where one cylinder body serves several product widths between 80 and 110 mm. Match FA/FB flange or LB foot mounts and I/Y rod knuckles to the ISO 21287 face, and order CMSE/DMSE switches only because this -S model includes the magnet. For new designs, specify the ACEJ16X110 instead: this ACPJ is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-30SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30SB FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa push is 140.7 N and pull 105.6 N; theoretical maximum is 20.5 kgf at 1.0 MPa. The -30 code means the 110 mm extend stroke can be trimmed by up to 30 mm with the external stop screw, so the working range is 80-110 mm. The stop sets the end position only - it does not hold a load if air is lost. The 110 mm stroke is made to order, since standard bore 16 strokes stop at 75 mm.
It is a compact double-acting cylinder with a hard-anodized aluminium body, S45C hard-chrome 8 mm rod, male rod thread (B code), M5x0.8 ports, PT port thread, fixed TPU bumpers at both ends, 0.15-1.0 MPa (22-145 psi) operating pressure and 30-500 mm/s speed. This model includes the optional -S magnet for CMSE/DMSE switches. The family is discontinued; the ACEJ16X110 is the current ISO 21287 drop-in - confirm its mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-30SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-30SB replacement — usually within 7-8 hours.