This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X110-30, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X110-30 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-30 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30
The ACPJ16X110-30 is a double acting compact cylinder with an adjustable stroke, now discontinued. Air drives the rod out and pulls it back, and a stop screw trims the extend stroke anywhere inside a 30 mm window, so the working range runs from 80 mm to 110 mm. Push force is 100.5 N and pull 75.4 N at 0.5 MPa, rising to 140.7 N at 0.7 MPa. The 110 mm stroke is longer than the 75 mm standard ceiling for the 16 mm bore, so this unit is made to order.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into cramped jigs and guard rails. In practice, plan on about 60 N (roughly 6 kg) of usable push at 0.5 MPa, enough to lift about 5 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries an S45C hard-chrome rod, a fixed TPU bumper sits at each end, and speeds of 30-500 mm/s suit fast pick-and-place. Note: no magnet is fitted on this code, so position switches cannot be mounted; order the -S variant for that. Replacement: ACEJ16X110.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-30 |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-30 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30 Is Used
Fixture clamping on CNC jigs
The 80-110 mm adjustable extend range lets one cylinder serve several fixture heights; 100.5 N push at 0.5 MPa suits light clamping of aluminium brackets before machining.
Reject pusher on packaging lines
At 30-500 mm/s the rod can kick off-the-shelf cartons off a conveyor lane, and the 30 mm trim window lets technicians dial the throw without swapping cylinders.
Sample lift in lab automation
With about 6 kg of usable vertical push at 0.5 MPa, the 16 mm bore raises small sample trays and microplate stacks inside compact analyzer frames.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30 with the ACEJ16X110-30
Size the job both ways: if 100.5 N of push at 0.5 MPa is more than needed, the 12 mm bore delivers 56.5 N; if the load needs more, step up to the 20 mm bore for 157.1 N. The stop screw only shortens the extend stroke within the 30 mm window and acts as a mechanical end stop - it does not lock or hold a load if air is lost, so add a separate clamp for holding. Mounting uses FA/FB flanges or LB feet on the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches. This model is discontinued; the current drop-in is the ACEJ16X110 - confirm ISO 21287 mounting dimensions before swapping, since ACP is DIN-standard.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-30
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-30 FAQ
At 0.5 MPa: 100.5 N push and 75.4 N pull. At 0.7 MPa: 140.7 N push and 105.6 N pull. Theoretical maximum is 20.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the extend stroke is trimmable by up to 30 mm (usable range 80-110 mm).
An external stop screw shortens the extend stroke on site by up to 30 mm inside the ordered window; it cannot lengthen the stroke past 110 mm. The stop is a mechanical end stop, not a mid-stroke lock - the rod still drifts if air is lost. This code has no magnet, so no switch can be mounted; order the -S version with the optional magnet to use CMSE / DMSE reed or solid-state switches. The model is discontinued - the ACEJ16X110 is the current replacement.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-30
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-30 replacement — usually within 7-8 hours.