This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X110-75SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-75SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-75SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB
The ACPJ16X110-75SB is a double acting compact cylinder with an adjustable extend stroke: a stop screw trims the 110 mm stroke by up to 75 mm, giving a usable range of 35-110 mm on site. This -S version carries the optional magnet, so CMSE or DMSE reed and solid-state switches can be mounted for end-of-stroke signalling. The 110 mm stroke exceeds the 75 mm maximum standard stroke for bore 16, so it is a made-to-order build.
At 0.5 MPa the bore 16 piston delivers 100.5 N push and 75.4 N pull, rising to 140.7 N push at 0.7 MPa with a theoretical 20.5 kgf maximum at 1.0 MPa. In practice plan on roughly 60 N of real work at 0.5 MPa, which is about 6 kg - enough to lift roughly 5 kg vertically with a 2:1 margin. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and the male (B code) rod thread suits I/Y knuckles. Discontinued: the current drop-in is ACEJ16X110 - confirm ISO 21287 mounting dimensions before swapping, since ACP is DIN-standard.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-75SB |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-75SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB Is Used
Fixture clamping on CNC jigs
The 35-110 mm adjustable range lets a machinist dial in clamp travel per fixture, with 100.5 N push at 0.5 MPa holding light aluminium parts during drilling.
Small-carton ejection on packing lines
Pushing 150 g cartons off a chute needs about 2 N; the 60 N usable force gives a wide margin, and the -S magnet with a DMSE switch confirms each eject.
Sample lift in lab automation
Lifting about 5 kg vertically with a 2:1 margin covers microplate stacks and sample trays, and the compact body fits inside benchtop enclosure frames.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB with the ACEJ16X110-75SB
Size both ways: if 100.5 N push at 0.5 MPa is marginal, step up to bore 20 for 157.1 N; if the load is light, bore 12 gives 56.5 N at lower air use. The 75 mm window means the machine can be commissioned at a shorter extend stroke and opened up later without re-plumbing. Remember the stop screw is a mechanical end stop only - on air loss the piston drifts, so it is not a load-holding lock. FA/FB flanges and LB feet bolt to the ISO 21287 face. Note this model is discontinued; order ACEJ16X110 as the current-production equivalent.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-75SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB FAQ
Push is 100.5 N and pull 75.4 N at 0.5 MPa; at 0.7 MPa push is 140.7 N and pull 105.6 N, with a theoretical maximum of 20.5 kgf at 1.0 MPa. The -75 code gives a 75 mm adjustment window, so the extend stroke can be trimmed anywhere between 35 and 110 mm via the stop screw. Speed range is 30-500 mm/s and operating pressure 0.15-1.0 MPa (22-145 psi).
Yes - the S code in ACPJ16X110-75SB means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted (models without -S have no magnet). The ACPJ family is discontinued; the current-production replacement is ACEJ16X110, same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, as ACP is DIN-standard.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-75SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-75SB replacement — usually within 7-8 hours.