This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X160-10B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X160-10B
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X160-10B is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 160mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X160-10B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X160-10B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X160-10B
This double acting compact cylinder from AirTAC's ACPJ series works on a 16 mm bore with a 160 mm made-to-order stroke and a 10 mm adjustment window, so a stop screw trims the extend stroke down to 150 mm on site. At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa that rises to 140.7 N. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into cramped jig plates and guarding where a full-length body cannot. The B code gives a male 8 mm rod thread, and the port is M5x0.8.
Plan around about 60 N of usable push at 0.5 MPa rather than the full 100.5 N rating, which corresponds to lifting roughly 5 kg vertically with a 2:1 margin. The 160 mm stroke exceeds the 75 mm standard maximum for this bore, so it is produced to order. Note that this model is discontinued: the current-production drop-in is the ACEJ16X160, same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard. No magnet is fitted unless the optional -S code is ordered.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X160-10B Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X160-10B |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X160-10B |
| Bore size | Ø16 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X160-10B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X160-10B
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X160-10B Is Used
Jig clamp on a small CNC fixture
The 100.5 N push at 0.5 MPa clamps light aluminium brackets in drilling fixtures, and the 10 mm window lets you trim the 160 mm stroke to clear the fixture plate exactly.
Reject pusher on a packaging line
Mounted with an LB foot beside a narrow conveyor, the short body ejects mislabelled cartons at 30-500 mm/s without stealing aisle length behind the frame.
Sample lift in a lab automation gantry
With about 5 kg of vertical lift capacity at a 2:1 margin, the male-thread rod raises small sample trays inside tight gantry towers where a profile cylinder will not fit.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X160-10B with the ACEJ16X160-10B
Size both ways: the 12 mm bore gives 56.5 N push at 0.5 MPa if your load is lighter, while the 20 mm bore reaches 157.1 N if you need more force from the same short body. The adjuster here is a mechanical end stop for the extend stroke only - it shortens travel, never lengthens it, and it does not lock the piston if air is lost. FA/FB flange and LB foot mountings bolt to the standard face, and add the -S code if you later want CMSE / DMSE switch sensing. For new builds, order the ACEJ16X160 instead, as this ACPJ version is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X160-10B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X160-10B FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa, 140.7 N push and 105.6 N pull; theoretical maximum is 20.5 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: a stop screw shortens the 160 mm extend stroke to as little as 150 mm. It is an end stop only, not a load lock, and the 160 mm stroke is made to order since the bore 16 standard maximum is 75 mm.
No - the ACPJ family is discontinued. The current-production replacement is the ACEJ16X160, a drop-in in the same bore, stroke and force class with a matching short ISO 21287 body. Confirm the ISO 21287 mounting dimensions before swapping, because the ACP is DIN-standard. Also note this unit has no magnet unless the optional -S code was ordered, so CMSE / DMSE switches only work on -S versions.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X160-10B
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X160-10B replacement — usually within 7-8 hours.